Celebrating
over 26yrs+ producing BCX Ultra Rife Frequency Machine (former models BCX 211, BCX 411, Biotec 2000), the longest producing rife machine manufacturer. The BCX Ultra Rife Frequency Machine is for exposing microbes to highly-modified variations of their own distinct frequency. Viruses bacterium can be eradicated, not affecting normal healthy tissue. The rife technology is backed up by nearly 80yrs of research/experimentation and is often used for experimenting on pathogens alternative metabolic deficiencies like inflammatory disease, Herpes, Fungus, Candida, Migraines, Infections, Depression, organ deficiency, Fibromyalgia, Viruses, Chronic Fatigue more. Made in USA. The BCX Ultra& rife is a bi-product of over 21 yrs of research, development manufacturing (USA made). Each year we
spend thousands in research using the latest technology and this can be seen thru our wide variety of apparatuses, ease of use, and functionality yet allowing the flexibil ity to do advanced research. Our (BCX Ultra) approach to our unit designs is to use Royal Rife's technology and build/add on taking advantage of the advancements in the latest technology. If Royal Rife was alive today we believe his rife devices would not look like 1930's or 1950's technology but would have advanced along with newer technologies. Other's philosophy is to mimic as close to possible Royal Rife's technology. A perfect example is with digital technology we are now able to use different wave types to deliver frequencies. Square waves, commonly used in modern devices, could not be produced by the older equipment. The BCX Ultra rife machine uses RF carrier wave to piggy back or carry the audio frequency deeper in to the body. The BCX Ultra gives you the flexibility to change any settings for research and testing. The BCX Ultra uses both delivery methods induction conduction. A fundamental difference between the BCX Ultra and most other Rife type devices is the way that we generate waveforms.
- BCX Ultra Deluxe unit is the frequency generator/amplifier & runs ALL BCX Accessories (widest range of Rife accessories). Our well known BCX plasma ray tubes use multiple energy types... more details
- BCX Ultra Lite unit is the BCX Ultra Deluxe unit & BCX High Powered beam tube combined & runs electrodes (no other BCX accessory). Our beam tube is the most powerful beam tube on the market!
** DON'T be fooled by PEAK POWER Claims. Some manufactures claim Peak Power as Power Output (unethical). Peak power is only at time of start-up & not continuous power otherwise the BCX Beam tube's Peak Power would be 1000 watts. Our engineer explains how power output is measured... more details
Frequency & Carrier Wave Range (up to 4Mhz!). Both the Carrier Wave &Frequency wave run 1 Hz - 4 MillionHz (variable, not fixed) & is capable of running ALL of Rife's Original Frequencies. Another feature is that you can turn off Carrier Wave if you choose to.
Gating or Pulsing (1Hz - 4 MillionHz) What is Gating? (click on the LEARN TAB for more info)
Duty Cylce range is 1 to 100%. What is Duty Cycle? (click on the LEARN TAB more info)
BCX Ultra has the widest range of wave forms i.e. Square, Sine, Pulsating Square, Triangle & many more for research/experimentation not offered by other manufacturers. Dr. Royal Rife stated that the more spikes in a frequency the more lethal to kill the virus. These resonant peaks of the frequency there is an increase in the voltage can break down the cells of the virus wall The more spikes in a wave & less dwell time, the less chance the organism can adapt to the frequency.
Plug & Play & Run up to 3 Accessories (no other rife machine can do this)! ALL BCX accessories run rife frequencies & receive the benefits of that type of accessory delivery... double the benefits!
BCX 'Non-Surgical FACELIFT' Accessories 
No other Rife machine has the ability to give you a FACE LIFT.
But the the BCX Ultra
Facelift Accessories can. Run our facial toning programs w our BCX Facelift accessories and see results with just 1 session!
Check out our BCX Face Lift pkg accessories for a Non-Surgical Face Lift and reduce wrinkles.. boosts collagen production plumping skin.
Duty Cylce range is 1 to 100%. What is Duty Cycle? (click on the LEARN TAB more info)
Over 1300 Pre-Stored & Create up to 256 Custom Programs
- Over 1300 prestored programs for many common conditions (up to 1426)
- 256 Empty Custom Programs to store your own frequencies. Each program can store up to 48 frequencies.Wow that is a lot!
BCX Ultra has the most sophisticated sweep for both Carrier & Frequency waves & more (refer below for more info)..
Sophisticated Chaining, Chain several programs to run per session. This means you can run as many programs as you like while you are sleeping instead of only running 1 program otherwise you will have to keep on waking up to select another program.
One of the best Warranty/Return policy in the industry. We have been manufacturing rife frequency machine for over 23yrs beginning w Biotec 2000, BCX211/BCX411. Each year we invest thousands on research & development. We stand behind our products w our 60 day return (10% restock fee) & 3yr warranty (upg to Lifetime warranty).
BCX Ultra uses both Induction & Conduction methods developed by Dr. Royal Rife (induction) & his two partners John Crane & John Marsh (conduction). The BCX Ultra is able to output Dr. Rife's frequencies.
BCX Ultra Plasma Raytubes uses both induction (like Rife's original equipment) & conduction. When both plasma raytubes are held, the power increases dramatically due to the conduction that occurrs when both tubes are touching the body. Each Plasma Raytube is operating at a different polarity, creating an electrical attraction between them running from one tube, thru the body to the other tube. This is an evolution of the Rife BeamTube which is incapable of this. video demo
The Induction method is where frequencies are delivered into the body using "Induction" non-contact method via plasma beamtube delivering a broad spectrum of energies. These energies range from visible light spectrum, conductive electron flow, electromagnetic fields, to electrostatic fields and more. "Bioelectrical Impedance Analysis" tests show proof that the rife frequencies do penetrate the body. The BCX Ultra High Powered Beamtube uses induction method.
The Conduction method is the direct-contact method of delivering frequencies through the body using electrical (a positive and a negative polarity) via the metal electrodes, used by John Crane
& John Marsh. The 'Bioelectrical Impedance Analysis" tests also show frequencies delivered do pass through the skin and penetrate into the body. There drawback to using this method is the level of penetration. However if you use
a RF radio carrier wave. the low audio frequencies will also penetrate cells. For this reason, the BCX Ultra has a carrier wave
(1hz - 4 Mhz) for electrodes/BT-HFPCM2 beamtube & 100,000 Hz for the
BCX Ultra Plasma Raytubes.
NOTE: Some researchers have evidence some plasma devices emit scalar waves (apparently Royal
Rife's did). Scalar waves help to regenerate & also devitalize pathogens- Nenah Sylver PHD, The Rife Handbook
BCX Ultra BRASS Cylinders: Brass (composed of Copper & Zinc) is the metal that brings out natural benefits. Brass has metaphysical healing properties to boost the immune system. It can amplify the flow of life energy within the body and help in calming thoughts and emotions. It is capable of grounding without draining precious energy and encourages the physical/emotional bodies to find alignment. It' s mineral make up, encourages the balance between warm sun energy and cool lunar energy.
Clarification on Misstatements by other Manufacturers on the BCX Ultra Plasma Ray Tubes about how the BCX Ultra carries frequencies through the body. BCX Ultra Plasma Raytubes use Conduction, Induction, Radiation, however, the main method is Conduction. Below are simple tests for a lay person to prove the BCX uses conduction method. video demo
1. Lay both raytubes next to each other 4" apart.
Notice the tubes glow dimly since there is a little conduction
thru air. Then hold both tubes, one in each hand.
Notice how bright they become! This completes the circuit through
the body for full power of the raytubes.
2. Touch the raytubes & notice it gets brighter where you touch the glass,
indicating the current is exiting the tube into the finger(s).
3. Both you & a partner
stand next to each other holding 1 raytube in outside hands w inside hands hanging down.
Then touch wrists together. Notice the shock, as
the cirrcut is completed. (Test is for those who want a strong
sensual persuasion)
How does electricity go thru glass?
Wikipedia - "Glass acts as a dielectric in a capacitor formed between the ionized gas and the hand." [1] Most of
the Raytubes energy is transmitted by Conduction, which is why
they touch the body.
Glass is an insulator however at high frequencies, electricity passes through it because it's dielectric characteristics. It is NOT a DC conductor, but it IS
as an AC conductor as the tests above prove.
1. http://en.wikipedia.org/wiki/Plasma_globe
A fundamental difference between the BCX Ultra and other comparable top rife devices is the way they generate waveforms. They will use a DSP (digital synthesizing processor) which, by nature, is only capable of generating digital Squarewaves.
By using filtering techniques, the circuit is capable of approximating a Sinewave by 'rounding off' the Squarewave.
The BCX Ultra uses entirely different electronics. It contains 3 separate Microprocessors each of which creates an 'Arbitrary Waveform'. Arbitrary Waveforms are exact and pure creations of naturally occurring and incidentally occurring waveforms. Examples of naturally occurring waveforms are Sine, Square, Triangle, Exponential, and Linear. An example of an incidentally occurring waveform is the Hoyland Waveform. The BCX Ultra faithfully reproduces the waveform that Hoyland generated using a complex array of apparatus. If fact, the Hoyland Waveform in the Ultra was created by digitizing an actual copy of Hoyland's test data. Another example of Arbitrary Waveforms are the Ultra's Odd Order Harmonic and Even Order Harmonics waveforms. The Odd Order Harmonic Waveform produces a fundamental, and the 3'rd, 5'th, and 7'th harmonics is perfect harmonic proportion. The Even Order Harmonic Waveform produces a fundamental, and the 2'nd, 4'th, and 6'th harmonics in perfect harmonic proportion.
With Arbitrary Waveforms, the BCX Ultra can produce ANY waveform imaginable- accurately, and perfectly. Harmonics can only be generated accurately and correctly if the fundamental waveform is accurate. The BCX Ultra contains 3 Arbitrary Waveform generators, which when combined together can produce an un-imaginable combination. This is why wave types are imperative to killing off organisms:
"Here's an analogy describing how these various wave signals perform, and how the body physically responds to them. If you put your hand on someone's back and exert a steady pressure, she will shift her weight and learn to compensate for your push. The relatively slow rise and fall times of a sine wave gives the body a chance to recognize, make adjustments for, and eventually ignore the signal. If, however, you suddenly push that person with the same amount of pressure, she will fall. The sudden thrusting quality of triangle and sawtooth waves takes the body by surprise. Similarly, the rapid rise and fall time of a square wave does not give the body a chance to compensate. However, the flat top line of a square wave means that after the body is taken by surprise, there is a relatively long period when the signal is steady. The body (and microbes) may or may not reject the signal. The shape of the wave is important not only because of the rise and fall times of the energy. The wave shape is also important because of the harmonics it produces.... " Nenah Sylver, PHD - The Rife Handbook (2011 Edition)
The BCX Ultra uses entirely different electronics. It contains 3 separate Microprocessors each of which creates an 'Arbitrary Waveform'. Arbitrary Waveforms are exact and pure creations of naturally occurring and incidentally occurring waveforms. Examples of naturally occurring waveforms are Sine, Square, Triangle, Exponential, and Linear. An example of an incidentally occurring waveform is the Hoyland Waveform. The BCX Ultra faithfully reproduces the waveform that Hoyland generated using a complex array of apparatus. If fact, the Hoyland Waveform in the Ultra was created by digitizing an actual copy of Hoyland's test data. Another example of Arbitrary Waveforms are the Ultra's Odd Order Harmonic and Even Order Harmonics waveforms. The Odd Order Harmonic Waveform produces a fundamental, and the 3'rd, 5'th, and 7'th harmonics is perfect harmonic proportion. The Even Order Harmonic Waveform produces a fundamental, and the 2'nd, 4'th, and 6'th harmonics in perfect harmonic proportion.
We are the only manufacturer that has a Square Pulse Width Wave (a modified square wave) which we found over time better results than a standard Square Wave. Square Pulse Width is a modified Square Wave that starts from zero and goes to 100% in about 2 seconds. The Square Pulse Width Wave builds up a charge that explodes and kills off more microbes than the standard Square Wave. Square Wave is included with the BCX Ultra however the preferred default wave type for killing off organisms is Square Pulse Width.
An exciting range of Wave Forms: BCX Ultra wave forms include square, sine, pulsating square, triangle & many more wave types for research. Square waves are used for killing pathogens sine waves for regeneration/healing. The BCX Ultra has many other wave forms to choose from for experimentation (refer below) which are not offered by other manufacturers. Dr. Royal Rife stated that if the more spikes in a frequency the more lethal to kill the virus. These resonant peaks of the frequency there is an increase in the voltage can break down the cells of the virus wall The more spikes in a wave & less time on, the less chance the organism can adapt to the frequency. Dr. Rife stated, "Now the spikes that you see on the frequencies are the lethal part that kill and devitalize the virus. They are the resonant peaks of the frequencies which increase the voltage to a very high potential which the cells of the virus wall can not tolerate and they break up into many pieces and are destroyed." This statement is according to John Crane business partner of Dr. Royal Rife. The more spikes and less dwell time the less chance of microbes to adjust. See more about BCX Ultra Custom Wave Forms below.
BCX ULTRA WAVE FORMS
Sweep Up starts at the Lowest frequency, and increases the frequency by the Step frequency for the duration of the Dwell seconds, repeating until the Highest frequency is reached. Then it begins again at the Lowest frequency repeating continually for the length of the Ultra's program time (up to 2 hours). Sweep Down starts at the Highest frequency, decreasing and repeating in the same fashion. Sweep Up/Down starts at the Lowest frequency, increases to the Highest frequency, decreases to the Lowest frequency, increases to the Highest frequency, over and over. Dwell Seconds are the amount of time that a frequency persists before the program changes to the next frequency. The program will calculate and tell you how long it will take to output each step frequency once before repeating. If this time is longer than 2 hours, you will be prompted to Reduce the Frequency Range between the Lowest and Highest frequencies, or to Increase the Step Frequency, or to Reduce the Dwell Seconds, all of which will reduced the sweep time. When running Sweep, the changing Sweep frequencies can be monitored by pressing the 'OK' button. Press the 'OK' button again to switch back to the normal Run display.
Note: Just because Frequencies are close in range DOES NOT mean they have the same purpose. An example would be 9.7 Hz for tendons. You don't want 9.6 or 9.8 because your results will be diminished. Another example, 1444Hz is to normalize testosterone in men and 1445 is to normalize testosterone in women. You certainly wouldn't want a male running this frequency and drift up towards 1445. It is important to keep this in mind when you are running sweeping so make sure you know the sweeping range is validated.
BCX ULTRA CARRIER WAVE:
Does anyone even manufacture a Rife machine like Royal Rife's original machine? No one today makes a Rife Frequency Machine like Royal Rife's machine. Find out why: click for answer
Looking for the best rife machine you want to at minimum to meet the basic specs in Royal Rife's original rife machine. A quality rife machine must have at minimum a RF (radio carrier wave) that reaches up to at min 4 Mhz, duty cycle, gating, plasma ray tubes, frequency range up to at least 2 Mhz, crystal control board (to get an accurate frequency) and lots of power. Additional benefits can be seen with other types of rife machine accessories that can emit the rife frequencies along with ther therapy modalities ie LEDs, PEMF, FIR etc. click for answer
If a "so called" rife machine doesnt have a plasma ray beam tube you might as well throw your money away. click for more info
In order to get a good quality rife machine it will costs in the thousands. Here is why it costs more. click for more info
A Duty cycle that goes up to 90% or 100% is imporant. Here is why it is important. click for more info
The proper wave type is key to getting better results. Here is why it important. click for more info
Some manufactures claim their power in Peak Power watts which is invalid and unethical.
This is not the industry standard on how to measure power output. Peak power is at the time of start-up in a bleap of a moment and is not continuous power.
If that were the case then our BCX High Powered beam tube Peak Power would be a 1000 watts.
Our engineer explains how power output is measured more details
What is Peak Power?
The peak power is the maximum power that the power supply can sustain for a short time and is sometimes called the peak surge power.
The peak power differs from the continuous power which refers to the amount of power that the supply can supply continuously.
Some Rife Machine manufacturers will specify output ranges effective 30 feet out (some less), such as PERL, is not effective due to the loss of power at that distance. The frequency or carrier wave signal can be picked up with our BCX at 60 feet but the power is insignificant at that distance. If you don't have the power then the frequency isn't effective. Period! This phenomona is called "Inverse Square Law". They have made some other claims as to why their PERL is able to do this however again this is not correct. For example they claim the body is an antenna so if that was the case FM radio stations put out 100,000 watts. If this whacky concept were true, standing a wavelength away from an FM radio station would concentrate all 100,000 watts in a human body (smell the charred flesh). As you know there are offices at the bottom of radio stations. Our engineer explains why more details
There are more considerations that are important to looke for. click for more info
Up to 4Mhz carrier wave & frequency is plenty high enough to run Rife's Original frequencies. Most frequencies used today are below 100,000 hz.
The BCX Ultra has a wide range of Core & Optional Accessories. Our clients have had great success w the Hand-held Plasma Ray Tubes & metal accessories. However w the stand alone BCX Ultra Beam Tubes (double-bubble tube) you can do hands free treatment while you are sleeping, more than one person or even combine up to 2 electrodes along w the Beam tube amplifying your results.
Our well known BCX handheld plasma raytubes (30w) are a lot more powerful than the electrodes (<1w) more details
Any Software Upgrades, just send in your unit to get the latest and greatest. Future option will be through your computer. For hardware upgrades in most cases your unit for a nominal fee can be upgraded, contact us and we can give you an estimate.
Yes. Why do I need to have them? Refer to DEFINITIONS under the LEARN ABOUT RIFE
No, both Amplifier and Frequency Generator are both built-in to our BCX Ultra unit (other units are separate) AND (4) Apparatuses are included (proprietary Hand Held RayTubes, metal footplates, metal hand-held cylinders, and pre-gel pads) other units have no included apparatuses or they only have metal cylinders. We do have additional apparatuses but not required and are optional.
We have 256 slots (custom programs) to save your own frequencies and for each slot you can save up to 48 frequencies making a total of 12,288 frequencies. You can also combine Pre-Stored programs and save them to your own custom program.
When you run a pre-stored program you have the ability to make any modifications you would like Or just run as is.
Yes it is a 'nice to have' functionality since it can run through a range of frequencies without having to store each individual frequency and with the BCX Ultra you can also try sweeping thru a range of carrier waves.
However please note that you must be sure that the range you are running is valid so use this functionality wisely.
Just because Frequencies are close in range DOES NOT mean they have the same purpose.
An example would be 9.7 Hz for tendons. You don't want 9.6 or 9.8 because your results will be diminished.
Another example, 1444Hz is to normalize testosterone in men and 1445 is to normalize testosterone in women.
You certainly wouldn't want a male using the machine and have the frequency drift up towards 1445.
It is important to keep this in mind when you are running sweeping.
With a sweep you can be doing the wrong frequency the majority of the time except for that brief moment when you brush over the correct freq.
With our machine you are doing a sweep in which you can select how long to dwell on a frequency instead of only a few seconds. When you briefly play a frequency for a few seconds you bruise it slightly.
Where as seen on Royal Rife's videos blowing up microorganisms, the microorganism struggles for many seconds or minutes before it blows up.
Rife and the early geniuses who worked with Rife new that you needed to strongly hit an organism long enough so that it would build up a big enough resonate charge to blow it up.
Again, a few seconds will only tease it. We do include Pre-stored programs that do a wide sweep of basic microbial clean-up
The output intensity for ANY spherical radiating device is specified by what is referred to as the "Inverse-Square Law": Intensity = Power / (4 x PI x Radius^2)
Example:
Power at 1 ft = X
Power at 2 ft = X/4
Power at 3 ft = X/9
Power at 4 ft = X/16
Power at 5 ft = X/25
Power at 6 ft = X/36
Power at 7 ft = X/49
Power at 8 ft = X/64
Power at 9 ft = X/81
Power at 10 ft = X/100
In other words, you have 1% of the power at 10 feet away that you have from 1 foot away. Even at 1,000 ft and more there is still some power, although very small. Without knowing what the desired power level is, you can't specify an "Output Range". If you are interested in maximum power, you want the shortest distance possible period.
Some unit manufacturers will specify output ranges effective ie 30 feet out (more or less). As you can see power is not effective this far out but the frequency signal can be picked up. If you don't have the power then the frequency isn't effective.
click for more information from our Engineer
The BCX Ultra does not merely output a frequency- that is not what Rife machines do. Real Rife machines "Modulate" the frequency. This turns the frequency on and off at a programmed rate with designated waveforms. Thus the average power drawn from the power supply is less than the maximum power that the BCX Ultra delivers.
Those who run multiple frequencies simultaneously are seeking the benefits of the time savings to use multiple frequencies. BCX Ultra manufacturer decided to cap at 3 simultaneous frequencies (frequency, carrier wave, and gating) due to the more frequencies ran the more the wattage/power is divided up thereby decreasing the power delivered per frequency. In turn then the user has to repeat the frequencies to get the needed dose. The BCX Ultra can run up to 3 frequencies (frequency wave, carrier wave and gating). Other manufacturers state differently. We believe running 1 carrier wave and 1 frequency with the most power output for that accessory is the best method for treatment. Having 1 carrier wave carrying multiple frequencies is not as effective. Now they state that if there is enough power delivered then each frequency will be effective and all is needed is .20 watts per frequency. However we limit our metal electrode power output to .75 watts (w 30-35 volts) to stay within safe limits since electricity is the means of delivery thru metal electrodes (this doesn’t apply to the plasma accessories). Most of our clients can’t handle the full .75 watts (then turn down the power) so we wonder how can someone handle the full power of 2.7watts? Keep in mind our BCX Ultra has a built in 18 watt amplifier so we easily can produce the power. Note our BCX Ultra unit has different accessories that add additional power to go from 20watts all the way up to 150 watts depending on the accessory. Refer this link for the test data proving this click for Test Data
WAVE FORMS:
Square wave is for killing pathogens and sine wave is used for regeneration and healing. The BCX Ultra has many other waveforms to choose from for your experimentation. At this time we use the sq. pulse width as the default because we are getting better results with this modified square wave than standard square wave. Many of our clients have reported this.
CARRIER WAVES:
The BCX Ultra has a carrier frequency wave so that the audio frequency can piggyback (carried) by the RF frequency (the carrier) causing the frequencies to penetrate deeper and farther. RF or radio frequencies above about 200,000 Hertz broadcast very well which is why they are called radio frequencies. Frequencies between 20,000 and 200,000 Hz broadcast to some degree, while frequencies below 20,000 Hz do not broadcast at all. Both the BCX Ultra RF carrier and audio frequency can be set anywhere from 1hz to 4Mhz.There are prestored programs with audio frequencies and carrier wave already set however carrier wave and other settings can be changed if so desired. The BCX Ultra gives you the ability to research and do your own testing.
GATING OR ENTRAINMENT:
This is what we used to call pulse. The previous unit had a pulse rate of about 2/3’s on and 1/3 off. You can use 3.5 Hz to get this same effect. We now use 56.2 Hz as the default in the BCX Ultra.
Abrams who worked with Rife used 3.5-4 Hz for gating. Dr. James Bare, a leader in the field of frequency technology, recommends the 20-30-40 Hz range for gating. It is generally believed that the higher the frequency the higher the gating. Rife’s 1939 instrument, which ran in the MHz range, had a 60 cycle gating.
What is gating? Gating is another form of modulation. The BCX Ultra is modulating 2 frequencies when it plays an audio frequency with a carrier (RF) frequency. In other words, the audio frequency is piggy backed onto a higher frequency. All the time this is happening, the Ultra introduces gating which creates the blink, blink you see as you play your frequencies.
Entrainment is defined as: "the tendency for two oscillating bodies to lock into phase so that they vibrate in harmony. It is also defined as a synchronization of two or more rhythmic cycles." This principle of entrainment is universal in nature.
DUTY CYCLE:
The Ultra has a default of 90 percent duty cycle. For many years people ran the standard 50% duty cycle. It is now known that a 90 % duty cycle exposes microorganisms to the frequency for 80% more time than a 50% duty cycle. Do the math. 90% is 80% greater than 50%. It is known that the higher the duty cycle, the greater the coordinative resonance. However, experimenters may choose any duty cycle 1-100 using the Ultra.
What is duty cycle? Duty cycle is how long the frequency is on and off when running a frequency. For example, if running the frequency 100Hz, the frequency is cycling 100 times per second. A 50% duty cycle means that the frequency is on 50 % and off 50% of each second. The 90 % duty cycle means that the frequency is on 90% and off 10% of each second. During the 90% on, it is cycling at the rate of 100 times a second.
The BCX Ultra runs all of Royal Rife's original frequencies.
Philip Hoyland's Audio Frequencies used with the listed carrier to produce, through side bands, Dr. Rife's frequencies
Rife/Hoyland Direct MOR's
"Frequency" is the # of times in a second an electrical pulse occurs, defined in Hertz (Hz). 10 Hz means that a signal changes polarity or pulses 10 times per second. Kilo (abbreviated K) means 1,000 (thousand), Mega (abbreviated M) means 1,000,000 (million), and Giga (abbreviated G) means 1,000,000,000 (billion). 10 KHz is the same as 10,000 Hz. 10 MHz is the same as 10,000,000 Hz.
Frequencies that can be heard are called Audio frequencies (abbreviated AF), and the rest of the frequencies (which are easily transmitted through the air) are commonly called Radio frequencies (abbreviated RF). (Although Audio frequencies are technically Radio frequencies as well) The dividing line between Audio and Radio frequencies is not consistent, varying with different people and industries. Frequencies below 100,000 Hz are audible to some animals and will not produce significant side frequencies that can be easily transmitted through the air. 100,000 Hz. is one appropriate dividing line between Audio and Radio frequencies.
Electrical signals act differently at different frequencies. A characteristic called "skin effect" (which is not confined to skin) causes a conductor to resist the flow of electricity as a function of frequency- the higher the frequency, the greater the resistance to the flow of electricity.
Lower frequencies have the ability to penetrate through the body. At high frequencies, say 1 GHz (low frequency radar), the same amplitude voltage can only penetrate a fraction of an inch into a body, and will only create a surface skin burn called a RF burn.
"Waveforms" are patterns of electrical energy over a period of time. A Sinewave is the fundamental building block of electricity and other energies. Sinewave mathematically defines a natural action describing a harmonic alternating event.
Mapping the elevation of a point on the perimeter of a circle as it constantly turns can show a Sinewave. On this picture, note that the arm is attached to the perimeter of a wheel. As the wheel is turned, the arm moves up and down, and a pen draws a Sinewave on paper that moves left to right.
A Sinewave travels above and below a middle, or mid-point, (+ and -), like waves advance and recede from an average position on the shoreline.
There are other common waveforms, such as Triangle waves and Square waves:
They obviously look different than Sinewaves, but they are closely related. Adding together Sinewaves of different frequencies, amplitudes, and phases creates Triangle, Square, and all other waveforms. The mathematics is straight forward.
BCX WAVE FORMS:
"Harmonics" is the combination of all the different frequency Sinewaves making up a complex waveform, for example Triangle wave, Square wave, and all other waves. Below lists the "Harmonic Content" of the BCX Ultra waveforms power generated.
Harmonic-
Referring to the above chart, 1’st (x1) Harmonic is the 'actual' frequency, 2’nd (X2) Harmonic is another frequency 2 x as large as the 'actual' frequency, and 3’rd (x3) Harmonic is another frequency 3 x as large as the 'actual' frequency, and continues on.
For Example: An Actual Frequency of 10 Hz, then a 2’nd Harmonic = 20 Hz; and the 3’rd Harmonic = 30 Hz.
For Example: A Triangle waveform @ 100Hz is generated by combining 99% of a 100Hz Sinewave w 1% of a 300Hz Sinewave.
Phase is the relationship of each Harmonic starting point within a period of time. Phases with different starting points will form different waveforms, however it will not change the ratios of power for each Harmonic delivered.
"POWER"
Various Waveforms are generated with uniform Peak to Peak (the lowest point to highest point) values. However, Peak to Peak values that are equal doesn't mean the same power is delivered and can deliver different power amounts. A Squarewave delivers 3 x more power than a Triangle Wave when at equal intensities. A Squarewave (intensity setting at 33%) will deliver the same power amount as a Triangle wave with 100% intensity.
The Table lists the power of the various waveforms.
The BCX Ultra is able to produce three concurrent
'Arbitrary' waveforms so they are not limited to electronic signals, for example the Sine wave & Squarewave. The BCX ultra can produce endless combinations of Harmonics (w any phase & ratio) since the BCX Ultra waveforms are arbitrary.
1. "Gate or Pulse" is the 1st BCX Ultra waveform. Gating or Pulsing are the commonly known terms, however since the BCX Ultra has much greater capability of Gating/Pulsing, a better term would be "Modulate". Modulating is where the waveform is increased and decreased by the power output intensity. Most rife devices (if they even have Gating/Pulsing) are not able to do this. They can only turn the signal on & off.
Inorder for a Gate/Pulse waveform to properly pass the harmonics of the Output frequency wave, the Gate/Pulse frequency wave must be lower than the other waveform frequencies.
2. "Duty Cycle" will insert an Off time in between each Modulated waveform and will correspondingly alter the frequency of the waveform. Selecting a Duty Cycle of 100% prevents any Modulation of the output, leaving it on full the entire time.
Example: A frequency of 1 Hz. is selected, which is 1 change per second. A duty cycle of 50% is selected. One complete waveform will take place in ½ second, after which the output will be blanked for ½ second. The process will then repeat.
3. "Carrier" is the term for the second Ultra waveform, and following conventional electronics, it "carries" a lower frequency within it. As such, in order to work properly, a Carrier frequency should be higher than the remaining waveform frequency.
4. "Frequency" is the term for the last Ultra waveform and is "carried" by the Carrier. Sequences are generally composed of a program of "Frequencies" one after another, each with the same "Gate" or "Pulse", and "Carrier" (which is optional).
5. "Pulsewidth": In addition to the waveforms described, there is an additional Arbitrary waveform that operates differently. It is called "Pulsewidth". Pulsewidth varies the On to Off ratio in a sweeping pattern as the program runs.
Example: A frequency of 1 Hz is selected, which is 1 change each second. The Output is turned on for 1/100’th of a second, and then turned off for 99/100’ths of a second. Next, it is turned on for 2/100’ths of a second, and then off for 98/100’ths of a second. This continues until it is on 99/100’ths of a second, after which the sweep starts again.
Electrodes are "differential". Each operates at a different polarity than the other, and they change polarities with frequency- when one is +, the other is -. All 3 waveforms can be applied to Electrodes.
Raytubes also have polarity, but the Carrier is capped at 100,000 MHz.
LED Wand has no polarity, and all 3 waveforms can be applied to it.
High Powered Beam Tubes (stand-alone) has no polarity, and all BCX Ultra waveforms can be applied to it
Comparisons & Reviews - BCX Ultra vs RF/EM Rife Machines...
Click on the below image to
Compare Perl M, GB4000, TrueRife, F-Scan, Spooky 2, EMEM, Beam Ray, Global Wellness, Energy Wellness, Wellness Pro, ProWave, Detox Box, JW Labs, Rife Digital, Rife Bare OR
Request a detailed Comparison on GB4000 & others
Your customer service is the best of any online company I have had any dealings with, and you can publish and quote me on that!
You have been terrific in helping me get to this point. There is NO WAY I could have gained this much knowledge and RESULTS... Read More
I'm absolutely convinced this machine works. I'm not saying it's my silver bullet, and I'm out of the woods etc but I'm very pleased... Read More
Practitioner Praise - "Can't be more thankful"... We have just finished our "free session" with Mark. He is a pleasure to deal with... Read More
I had my practitioner session with Mark. He is very knowledgeable about Rife, and was able to create a custom program to help me... Read More
Thank you again for all the help and going out of your way to get us our BCX unit and beam light expeditiously... Read More
FOR MORE TESTIMONIALS click here
The BCX Ultra Plasma Frequency Instrument is not approved by the F.D.A. as a Medical Device. They are experimental electronic instruments. They are not intended for the diagnosis, prevention, treatment, cure or mitigation of any disease in humans. They are not designed to affect the structure or function of any system in the body. If you have a health-related condition that requires medical attention, always consult with a licensed health care professional. NOTE: You should realize though, that you do have LEGAL Rights to self-medicate under the 9th Amendment of the United States Constitution.
DO NOT use ANY Electrotherapy Device, if you have a Cardiac Pacemaker or Internal Defibrillator. DO NOT use ANY Electrotherapy Device, if you are a Pregnant, have Heart Disease, are driving or are using HAZARDOUS Machinery. These Devices should also be kept out of reach of Children. DO NOT place Electrode Pads over Skin Lesions, Abrasions, NEW Scars, Cuts, Eruptions, or Sunburn. DO NOT advance Output Amplitude to UNCOMFORTABLE Levels. DO NOT fall asleep, while using. * If you feel Sluggish, Faint, Dizzy, Headachy, Nauseous, or have Flu-like Symptoms after Exposures, REDUCE Number of Pulses per Session and/or SHORTEN Session Times. Use CAUTION, if you have IMPAIRED Kidney or Liver Function. Use CAUTION, if you have Metal Implant. Someone, although rare, may feel a sensation where the metal implant is located. However, they opt to run the freqs because the sensation is less bothersome than the problem.
Systems Unlimited warrants your BCX Ultra
Deluxe & Lite unit & BCX Accessory electronic boxes
(PEMF box, FIR Box, Beamtube) to be free of defects in material and workmanship under normal use for three year from date of purchase, parts and labor included
& 30 days for BCX Accessories. Customer will be responsible for shipping fees incurred when mailing the instrument to the engineer for repairs. Systems Unlimited will be responsible for shipping fees incurred when mailing the instrument back to the customer while under warranty
within the US. Any unauthorized repairs or modifications are not covered under this warranty. Any unauthorized component that is not manufactured or approved by the
BCX manufacturer used on the BCX unit will void the warranty.
Contents of package upon arrival must be inspected upon receipt and report any broken glass tubes within the first 24 hours of delivery.
Tubes with broken glass will not be covered by this warranty beyond the first 24 hours of delivery.
60-day money back guarantee
less 10% restock fee if you are not completely satisfied
with your BCX Deluxe & Lite Unit purchase & shipping. If canceled before order
is shipped or if returned unopened within 14 days from
ship date, there will be cc fees + shipping (if shipped) applied to refund. If any
items are returned damaged then additional fees may be
applied.
Lifetime Warranty Upgrade (Optional)
For $350, you can upgrade to a Lifetime warranty on the BCX unit (not
accessories). Lifetime warranty includes the first 3 years warranty that comes with the unit (not accessories)
and if there is a
mechanical failure with the unit you pay for shipping to us, we cover labor and parts and we pay for return shipping.
After the 3 years you pay for shipping both ways and we cover labor and parts. For International addresses the customer pays for shipping both ways and we cover labor and parts for both the 3 years and lifetime warranty. Lifetime upgrade must be done at the time of purchase and is not transferrable to a new owner.
Pay in full by using our online shopping cart or call in 888-874-0944 using a MasterCard, VISA, Discover, Diner's Club, Paypal Echeck 
Pay with cash for unit orders to get $100 off with echeck or wire. For details contact us.
Pay using our 'Lease To Buy' Plan and make low monthly payments (just select the term of the lease or # of payments) and fill out the below online application.
Your credit is then checked, and if approved the papers will be emailed to you. Your order will be shipped once lease papers are submitted and first months payment is received.
Our normal return policy doesn't apply with a lease.
To apply, fill out the apply online Commercial application
To apply, fill out the apply online Consumer application
Pay using our Paypal Credit at checkout.
Subject to credit approval by just answering 2 questions & accepting terms. You must pay with 'PayPal Credit' at checkout to get the offer. Your order will be shipped once approved
& paid. ** No fee, & 0% interest (if paid off 6 months for > $99
see terms
-
Not a PayPal Credit customer? Apply Now
- Already a PayPal Credit customer?
Explore your account
Pay using our Paypal Credit at checkout.
Subject to credit approval by just answering 2 questions & accepting terms. You must pay with 'PayPal Credit' at checkout to get the offer. Your order will be shipped once approved
& paid. ** No fee, Interest appplies
(min purchase of $250). see terms
-
Not a PayPal Credit customer? Apply Now
- Already a PayPal Credit customer?
Explore your account
..
as low as $72 for 24 months (starting
w BCX Ulta Std Pkg). Minimum $250 purchase required.
