Quest?  Click to Chat Live  OR (888) 874-0944  OR  Click to Call 

Home / Products / BCX Ultra Rife / Product Details

Rife Machine BCX Ultra

The BCX Ultra Rife BCX Ultra® rife is a bi-product of over 21 yrs of research, development & manufacturing (USA made). Each year we spend thousands in research using the latest technology and this can be seen thru our wide variety of apparatuses, ease of use, and functionality yet allowing the flexibility to do advanced research. Our (BCX Ultra) approach to our unit designs is to use Royal Rife’s technology and build/add on taking advantage of the advancements in the latest technology. If Royal Rife was alive today we believe his rife devices would not look like 1930′s or 1950's technology but would have advanced along with newer technologies. Other's philosophy is to mimic as close to possible Royal Rife’s technology. A perfect example is with digital technology we are now able to use different wave types to deliver frequencies. Square waves, commonly used in modern devices, could not be produced by the older equipment. The BCX Ultra rife machine uses RF carrier wave to piggy back or carry the audio frequency deeper in to the body. The BCX Ultra gives you the flexiblility to change any settings for research and testing. The BCX Ultra uses both delivery methods induction & conduction. A fundamental difference between the BCX Ultra and most other Rife type devices is the way that we generate waveforms.  click for Rife Machine Comparisons & Reviews

 BCX ULTRA FEATURES:

The Rife MachineBCX Ultra Features

1236 Pre-Stored Programs for many common conditions (up to 1426) 256 Empty Programs to store your own frequencies.
Frequency & Carrier Wave run 1 Hz - 4 MillionHz & capable of running Rife's Original Frequencies. Carrier Wave can be on or off. Gating or Pulsing: yes, variable 
Duty Cycle
: 1 to 100%
  Sophisticated SWEEP Carrier & Frequency & more.. CHAINING:  Select multiple programs to run per session.

Wide Variety of Accessories (plug&play, run 1 to 3):

  • Hand-held Ray Tubes (1Hz-100,000 Hz)

  • Electrodes - metal cylinders, metal footplates, gel patches (1Hz - 4 MillionHz)
  • High Powered Beam Tubes (now 150w, 1 Hz - 4 MillionHz)
  • Vortex - directional to concentrate the energy more in one spot, either touching the body or be held just off the body  (50W, 45,000HZ)
  • PEMF Body Frequency Matt just plug in to the BCX Ultra unit, Pulsed Electromagnetic Field therapy, run frequencies while you are sleeping (20w,10hz-10Khz), no body matt is this strong or runs this range of frequencies!
  • Run Rife frequencies while receiving PEMF therapy.
  • Doug Coil (coming soon) just plug in to the BCX Ultra unit
WAVE FORMS: An exciting range square, sine, pulsating square, triangle & more for advanced research
With over 20yrs producing Rife Machines starting w Biotec 2000, BCX211/BCX411  Unlimited Customer Support & access to our professional practitioners
 WHY BCX ULTRA? & FAQs?s See how simple it is to run a Pre-Stored Program Demo Video (sampling of BCX Ultra functionality)
Warranty: 2 yrs    Money-back guarantee: 60 days, 10% restock fee

For detailed TECHNICAL SPECS click for  'Specs' ...  

 BCX ULTRA PRODUCT PACKAGES & ACCESSORIES:

BCX Ultra power unit is very simple and flexible. It runs stand-alone with no need to hook up to a computer. It is both the frequency generator and amplifier. The BCX Ultra unit controls all our assesories with no change in software or additional hardware. It is that simple! All you need to do is select what apparatuses you would like. We offer combination packages for additional savings. Refer below to the different apparatuses offered.

 

RIFE PACKAGES: (Choose A Package)

Standard Package: $2,695  
BCX Ultra w (4) hand-held apparatuses BCX Ultra unit
Frequency Generator and Amplifier
Can be used any where in the world.
Included Accessories: w  (4) Std. Hand-held Accessories:
Hand-held Ray Tubes (30w, Noble Gas)
Metal Footplates,
♦ Metal Cylinders hand held,
Gel Pads
Std + PEMF Matt  Package: $3,450  
BCX Ultra w Std Accessories & PEMF Body Matt BCX Ultra unit
Frequency Generator and Amplifier
Can be used any where in the world.
Included Accessories: w  PEMF Body Rife Matt +  (4) Std. Hand-held Accessories:
   ♦
Hand-held Ray Tubes (30w, Noble Gas)
   ♦
Metal Footplates,
   ♦
Metal Cylinders hand held,
   ♦ Gel Pads
  ♦ PEMF Body Rife Matt (20w,PEMFs) uses PEMF therapy 
Vortex Package: $3,295  
BCX Ultra w Vortex Beam Tube BCX Ultra unit
Frequency Generator and Amplifier
Can be used any where in the world.
Included Accessories: w  Vortex Beam Tube:
Plasma Vortex Tube (50w, Noble Gas) can be Hand-held or Stand alone 
  • ADD-ON (4) std. hand-held accessories $400
  •      
    HPPCM2 BEAMTUBE PACKAGE: $4,545  
    BCX Ultra rife  w BT-HF PCM Beam Tube BCX Ultra unit
    Frequency Generator and Amplifier
    Can be used any where in the world.
    Included Accessories: w BT- HF PCM2 Beam Tube:
    High Powered Plasma Beam Tube (now 150w, 4 MHz, Noble Gas) standalone details
  • ADD-ON (4) std. hand-held accessories $400
  • STANDARD ACCESSORIES:   BCX ULTRA
    ADDITIONAL ACCESSORIES:
    BCX Ultra Hand Held Ray Tubes
    Why BCX STD LED Wands?STANDARD LEDs
      (Red, Green, or Blue) details.
     
    BCX Ultra Metal Footplates   High Powered LED Wands for BCX Ultra rife HIGH POWERED LEDS
       (Red, Green, or Blue) details..
    BCX Ultra Hand Held Metal Wands   HIGH POWERED BEAM TUBES

    E-Field & Plasma double bubble details
    BCX Ultra Gel Pads   BCX Ultra VortexVORTEX
    'Free Standing' or Hand-held Plasma Coil, directional details..
        PEMF Rife Matt (Pulsed Electromagnetic Field Therapy) - Runs Rife Frequencies & Earth Frequencies while receiving the benefits of PEMF therapy details..
    Warranty: 2 years  
    Money-back guarantee: 60-day, 10% restock fee, See our return policy for more details.

     

     WAVE FORMS:

    Use square wave for killing pathogens and sine wave for regeneration and healing. The BCX Ultra has many other wave forms to choose from for experimentation (refer below) not offered by other manufacturers. Dr. Rife stated, “Now the spikes that you see on the frequencies are the lethal part that kill and devitalize the virus. They are the resonant peaks of the frequencies which increase the voltage to a very high potential which the cells of the virus wall can not tolerate and they break up into many pieces and are destroyed.” This statement is according to John Crane business partner of Dr. Royal Rife. The more spikes and less dwell time the less chance of microbes to adjust. See why Wave Forms are important details...

     CARRIER WAVE:

    The BCX Ultra now runs carrier wave from 1Hz to 4 MegaHZ. & up to 100,000Hz for the glass hand-held Ray Tubes.  Carrier wave can be On or Off.

      BLOG w TIPS, Testimonials, Protocols, More frequencies, Buyers Guide, & more

    Read actual email submissions from other very satisfied customers.

    “I would never return this machine in a million light years..…”

        Read Full Testimonial

    “Another Lyme Story..…”

        Read Full Testimonial

    “TIPS - How to Buy a Rife MachineBCX Ultra..…”

        Read Full Testimonial

    “Testimonials ..…”

        Read Full Testimonial

     

    BCX ULTRA & BCX ULTRA LITE PRODUCT OVERVIEW SPECS:
    Specs: Details: Description:
    Product dimensions: Control unit - 11.0" x 8.0" x 3.0",  2.5 lbs Frequency Generator and 18 watt Amplifier
    Power input: Plugs into 120-240VAC 50/60Hz Power Source Provides power to various Output devices Can be used any where in the world.
         
    Accessories: ELectrodes (metal hand cylinders, metal footplates, gel pads) conduction device
    Hand-Held Ray Tubes
      (BCX Ultra only)
    Plasma Carrier Modulator (AC Radio Frequencies (RF), Conduction, Electromagnetic (EM), Electric Field (E-Field), Ultra-red (UR), Visible, & Ultra-violet (UV) Light)
      Beam Tube High Powered Plasma (BT-HFPCM2) Plasma Carrier Modulator  (AC Radio Frequencies (RF),
    Conduction, Electromagnetic (EM), Electric Field (E-Field),
    Ultra-red (UR), Visible, & Ultra-violet (UV) Light)
      Vortex
       (BCX Ultra only)
    Plasma Carrier Modulator  (AC Radio Frequencies (RF),
    Conduction, Electromagnetic (EM), Electric Field (E-Field), Ultra-red (UR), Visible, & Ultra-violet (UV) Light)
      LED Wands (Standard)
       (BCX Ultra only)
    Light Emitting Device
      LED Wands (High Powered)
       (BCX Ultra only)
    Light Emitting Device
      Beam Tube High Frequency EFG (BT-HFEFG
        (BCX Ultra only))
    Electric Field Generator
    Frequency: 1 Hz up to 4 Million Hz frequency range dependent upon accessory
    Carrier Wave: 1 Hz up to 4 Milion Hz carrier range dependent upon accessory
    Wave Types:   Squarewave,  Sinewave,  Square Sweep,  Trapezoid,  Triangle,  Hoyland,  Linear Ramp Up,  Linear Ramp Down,  Exponential Ramp Up,  Exponential Ramp Down,  Equal Odd Order Harmonics,  Equal Even Order Harmonics,  Custom 1 Custom 2,  Custom 3
    Programs: 1236 Internal non-volatile (User re-nameable) 255 User Configurable(Completely configurable including name)
    Duty Cycle, Modulation & Gate Variable Duty Cycle 1 to 100%
    1 to 10,000 Hz
    Squarewave,  Sinewave,  Square Sweep,  Trapezoid,  Triangle,  Hoyland,  Linear Ramp Up,  Linear Ramp Down,  Exponential Ramp Up,  Exponential Ramp Down,  Equal Odd Order Harmonics,  Equal Even Order Harmonics,  Custom 1 Custom 2,  Custom 3
    Chaining: Chain up to 100 Programs
    Repeat programs for unlimited program run time
     
    Sweeping: • 2 Fully independent Frequency Sweep functions
    • Sweep Carrier, Frequency, or Both at the same time
    • Sweep Carrier, Frequency, or Both at the same time
    • Synchronize 2 Sweeps
    • Sweep Up, Sweep Down, or Sweep Up/Down
    • Programmable Sweep Duration 1 to 120 Seconds
    • Programmable Sweep Increments 0.00001 Hz to 1 mHz (dependent upon frequency)
    • Repeating Sweeps up to 2 Hours (indefinitely w program Chain)
    Warranty: 2 years, after 2 years customer pays repairs  
    Money-back guarantee: 60-day, 10% restock fee, See our return policy for more details.

    BCX ULTRA UNIT SPECS:
    click on image below to view

    ELECTRODE TECHNICAL SPECS:
    click on image below to view
    HAND-HELD RAY TUBES SPECS:
    click on image below to view


    LED - STANDARD TECHNICAL SPECS:
    click on image below to view

    LED - HIGH POWERED TECHNICAL SPECS:

    click on image below to view


    VORTEX TECHNICAL SPECS:

    click on image below to view
    BEAM TUBE - HIGH POWERED (BT-HF PCM2) TECHNICAL SPECS:

    click on image below to view
    BEAM TUBE - HIGH FREQUENCY EFG (BT-HFEFG) TECHNICAL SPECS:

    click on image below to view
    BCX PEMF RIFE BODY MATT TECHNICAL SPECS:

    click on image below to view
    WHY BCX ULTRA?

    1. Wide Range of Wave Types including our exclusive Square 'Pulse' Wave. Wave Types are imperative to kill of organisms and here is why details .

    2. Runs ALL ORIGINAL RIFE Frequencies. BCX Ultra runs from 1Hz up to 4MHz. NOTE: 4MHz is enough to run Rife's Original Frequencies

    3. Wide Range of Apparatuses/Electrodes both included and optional (see what is new & upcoming).

    4. Our Hand-held Plasma Ray Beam Tubes  details...

    5. Any Software Upgrades, just send in your unit to get the latest & greatest. Future option will be through your computer.

    6. Radio Carrier Wave & Gating Wave. A Radio Carrier wave is a absolutely necessary in order to carrier the frequency deep in to the body. If a unit does not have a Radio Carrier wave then it is basically useless. Rife himself used a Radio Carrier wave.

    7. Our 'Square Pulse Wave' - Pulses a Square Wave. We have found this to more effective than the Standard Square Wave and better results are being seen with the die off.

    8. Amplifier & Frequency Generator are both built-in to our BCX Ultra unit. Our previous models were built separatly.

    9. Exciting New Apparatuses that will connect with the BCX Ultra including our new PEMF Body Rife Matt.

    10. Longest producing unit manufacturer for over 20yrs starting with the Biotec 2000, BCX211 & BCX411

    11. We use Crystal circuitry board technology to get an exact frequency and we have the fastest surge rate of any unit. BCX Ultra: 150nsec from 1 to 4.00MHz . What does a faster surge rate translate to? It means better results for killing off organisms.

    12. Sophisticated CHAINING:  Select multiple programs to run per session. Great for running while you are sleeping and practitioners.

    13. Sophisticated SWEEP both Carrier & Frequency & more  details..

    14. BCX Ultra Delivery Method: The BCX Ultra uses both induction & conduction methods for delivering rife frequencies used by Royal Rife and  business partners (John Crane and John Marsh). For more  details..

     BENEFIT OF HAND-HELD RAY TUBES vs. HAND-HELD METAL ACCESSORIES

    The BCX Ultra uses both methods (induction & conduction) developed by Dr. Rife and his two business partners, John Crane and John Marsh.

    The Induction method is the method where frequencies are delivered into the body using the “Induction” non-contact method via plasma ray beam tubes. Royal Rife developed this method which delivers a broad spectrum of energies. These energies range from visible light spectrum, conductive electron flow, electromagnetic fields, to electrostatic fields and more.   “Bioelectrical Impedance Analysis” tests show proof that the rife frequencies do penetrate the body.

    Note: The BCX Ultra Hand-Held plasma Raytubes uses induction (like Rife's original equipment) & conduction. When a person holds both plasma ray tubes then the power increases dramatically due to the conduction that occurrs when both tubes are touching the body. This occurs because each hand-held Raytube are operating at a different polarity from each the other, creating an electrical attraction between them running from one tube to the other tube. This is an evolution of the Rife or Beam Tube that are incapable of this. check out the video demonstration

    The Conduction method is the direct-contact method of delivering frequencies through the body using electrical (a positive and a negative polarity) via the metal electrodes which was used by John Crane and John Marsh. The “Bioelectrical Impedance Analysis” tests also show frequencies delivered do pass through the skin and penetrate into the body. There drawback to using this method is the level of penetration which is overcome by using an RF radio carrier frequency. However if you use an RF radio carrier frequency the low audio frequencies will also penetrate the cells. For this reason the BCX Ultra has a carrier wave that can be set from 1hz to 4 Mhz (electrodes/BT-HFPCM2 beam tube) and up to 100,000 Hz for the hand-held plasma tubes. 

    Through the use of these two methods the BCX Ultra is able to output Dr. Rife’s RF frequencies. The BCX Ultra has a carrier frequency so that the audio frequency can be piggyback (carried) by the RF frequency (carrier) causing the frequencies to penetrate into both the connective tissue and the cells of the body. Both the RF carrier and audio frequencies can run  from 1hz to 4Mhz. There are pre-stored programs already set to run as is or can be modified. You can even store up to 250 custom programs. The BCX Ultra gives you the ability to to do your own research/testing. 

    ‘Scalar waves are emissions that are not part of the electromagnetic (EM) spectrum. A few innovative researchers have evidence that some plasma devices emit scalar waves (as apparently did Royal Rife’s instrument)—and that these scalar waves help regenerate the body as well as possibly devitalize pathogens…’ Nenah Sylver PHD, The Rife Handbook (2011 Edition)

    Misinformation on the BCX Ultra Hand Held Ray Tubes

    There is some confusion out there about how the BCX Ultra carries frequencies through the body. BCX Ultra Hand-held Raytubes use Conduction, Induction, and Radiation, however, the main method is Conduction. Here are some simple tests that a lay person can observe and perform to prove that we do use the conduction method.

    1. Lay both tubes next to each other about 4” apart and notice that the tubes glow dimly. They glow dimly because there is a little conduction through the air. Now, hold both tubes, one in each hand, and notice how bright they become. This is because you are now completing the circuit through your body allowing the full power of the ray tube circuit to flow through the tubes and then through you.

    2. Touch the tubes and you will notice that the light gets brighter where you touch the glass. This indicates that current is exiting the tube and into your finger touching the tube. Note: Our stand alone beam tube units do not show much of this phenomenon because they are using mostly the induction and radiation methods.

    3. This is a fun experiment. Especially, if your partner isn’t aware of the result. Both you and your partner hold one of the ray tubes in your outside hand as you stand next to each other. With your inside hands let your hands droop down, palm facing down. Next, touch the top side of your wrists together and notice the pronounced shock you get as you complete the circuit. If you look closely while doing this you will see sparks. This test is only for those that need a very strong sensual persuasion to understand simple principles of ray tube operation.

    Now, you are wondering how electricity goes through glass. Wikipedia. says this. “The glass acts as a dielectric in a capacitor formed between the ionized gas and the hand.” [1] Most of energy of Raytubes is transmitted by Conduction, which is why you hold them. Yes, glass is an insulator, but at high frequencies, electricity passes through it because it’s dielectric characteristics change. It is NOT a direct current (DC) conductor, but it IS an alternating current (AC) conductor as the simple tests above prove.

    1. http://en.wikipedia.org/wiki/Plasma_globe

     

     BENEFITS OF BCX ULTRA CUSTOM WAVEFORMS & CUSTOM MODULATION

    A fundamental difference between the BCX Ultra and other comparable top rife devices is the way they generate waveforms. They will use a DSP (digital synthesizing processor) which, by nature, is only capable of generating digital Squarewaves.

    By using filtering techniques, the circuit is capable of approximating a Sinewave by 'rounding off' the Squarewave. The BCX Ultra uses entirely different electronics. It contains 3 separate Microprocessors each of which creates an 'Arbitrary Waveform'. Arbitrary Waveforms are exact and pure creations of naturally occurring and incidentally occurring waveforms. Examples of naturally occurring waveforms are Sine, Square, Triangle, Exponential, and Linear. An example of an incidentally occurring waveform is the Hoyland Waveform. The BCX Ultra faithfully reproduces the waveform that Hoyland generated using a complex array of apparatus. If fact, the Hoyland Waveform in the Ultra was created by digitizing an actual copy of Hoyland's test data. Another example of Arbitrary Waveforms are the Ultra's Odd Order Harmonic and Even Order Harmonics waveforms. The Odd Order Harmonic Waveform produces a fundamental, and the 3'rd, 5'th, and 7'th harmonics is perfect harmonic proportion. The Even Order Harmonic Waveform produces a fundamental, and the 2'nd, 4'th, and 6'th harmonics in perfect harmonic proportion.

    With Arbitrary Waveforms, the BCX Ultra can produce ANY waveform imaginable- accurately, and perfectly. Harmonics can only be generated accurately and correctly if the fundamental waveform is accurate. The BCX Ultra contains 3 Arbitrary Waveform generators, which when combined together can produce an un-imaginable combination. This is why wave types are imperative to killing off organisms:

    "Here's an analogy describing how these various wave signals perform, and how the body physically responds to them. If you put your hand on someone's back and exert a steady pressure, she will shift her weight and learn to compensate for your push. The relatively slow rise and fall times of a sine wave gives the body a chance to recognize, make adjustments for, and eventually ignore the signal. If, however, you suddenly push that person with the same amount of pressure, she will fall. The sudden thrusting quality of triangle and sawtooth waves takes the body by surprise. Similarly, the rapid rise and fall time of a square wave does not give the body a chance to compensate. However, the flat top line of a square wave means that after the body is taken by surprise, there is a relatively long period when the signal is steady. The body (and microbes) may or may not reject the signal. The shape of the wave is important not only because of the rise and fall times of the energy. The wave shape is also important because of the harmonics it produces.... " Nenah Sylver, PHD - The Rife Handbook (2011 Edition)

     BCX ULTRA HOYLAND WAVE:

    The BCX Ultra uses entirely different electronics. It contains 3 separate Microprocessors each of which creates an 'Arbitrary Waveform'. Arbitrary Waveforms are exact and pure creations of naturally occurring and incidentally occurring waveforms. Examples of naturally occurring waveforms are Sine, Square, Triangle, Exponential, and Linear. An example of an incidentally occurring waveform is the Hoyland Waveform. The BCX Ultra faithfully reproduces the waveform that Hoyland generated using a complex array of apparatus. If fact, the Hoyland Waveform in the Ultra was created by digitizing an actual copy of Hoyland’s test data. Another example of Arbitrary Waveforms are the Ultra’s Odd Order Harmonic and Even Order Harmonics waveforms. The Odd Order Harmonic Waveform produces a fundamental, and the 3'rd, 5'th, and 7'th harmonics is perfect harmonic proportion. The Even Order Harmonic Waveform produces a fundamental, and the 2'nd, 4'th, and 6'th harmonics in perfect harmonic proportion.

     SQUARE PULSE WIDTH WAVE:

    We are the only manufacturer that has a Square Pulse Width Wave (a modified square wave) which we found over time better results than a standard Square Wave. Square Pulse Width is a modified Square Wave that starts from zero and goes to 100% in about 2 seconds. The Square Pulse Width Wave builds up a charge that explodes and kills off more microbes than the standard Square Wave. Square Wave is included with the BCX Ultra however the preferred default wave type for killing off organisms is Square Pulse Width.

      WHY OUR SWEEP:

    We offer a sophisticated Sweep Function.

    BCX Ultra- Feature 'Sweep': 

    • 2 Fully independent Frequency Sweep functions
    • Sweep Carrier, Frequency, or Both at the same time
    • Synchronize 2 Sweeps
    • Sweep Up, Sweep Down, or Sweep Up/Down
    • Programmable Sweep Duration 1 to 120 Seconds
    • Programmable Sweep Increments 0.00001 Hz to 1 mHz (dependent upon frequency)
    • Repeating Sweeps up to 2 Hours (indefinitely with program Chain)
    • Sweep Range 1 Hz to 4 Mhz Squarewave, 1 Hz to 100 kHz other Waveforms
    • Comprehensive Sweep Programming verification and feedback
    • Save and Edit up to 255 Sweep Programs

    Sweep Up starts at the Lowest frequency, and increases the frequency by the Step frequency for the duration of the Dwell seconds, repeating until the Highest frequency is reached. Then it begins again at the Lowest frequency repeating continually for the length of the Ultra's program time (up to 2 hours). Sweep Down starts at the Highest frequency, decreasing and repeating in the same fashion. Sweep Up/Down starts at the Lowest frequency, increases to the Highest frequency, decreases to the Lowest frequency, increases to the Highest frequency, over and over. Dwell Seconds are the amount of time that a frequency persists before the program changes to the next frequency. The program will calculate and tell you how long it will take to output each step frequency once before repeating. If this time is longer than 2 hours, you will be prompted to Reduce the Frequency Range between the Lowest and Highest frequencies, or to Increase the Step Frequency, or to Reduce the Dwell Seconds, all of which will reduced the sweep time. When running Sweep, the changing Sweep frequencies can be monitored by pressing the 'OK' button. Press the 'OK' button again to switch back to the normal Run display.

    Note: Just because Frequencies are close in range DOES NOT mean they have the same purpose. An example would be 9.7 Hz for tendons. You don't want 9.6 or 9.8 because your results will be diminished. Another example, 1444Hz is to normalize testosterone in men and 1445 is to normalize testosterone in women. You certainly wouldn't want a male running this frequency and drift up towards 1445. It is important to keep this in mind when you are running sweeping so make sure you know the sweeping range is validated.

     DEMO

    Example on How the Rife MachineBCX Ultra works

    See how simple it is to run a Pre-Program Demo Video. Sampling of what can be done with the BCX Ultra.


    Why BCX Ultra Accessories?

     

    click on above Accessory for more details

       
    Why Hand-Held Ray tubes?

    BCX Ultra Hand-Held Ray Tubes
            - Carrier: Operate up to 100,000Hz carrier frequency
            - Frequency: Modulated 1 to 100,000Hz w all wave forms
                (square, sine, etc.)
            - Variable Intensity
            - Power: 30 watts
            -  Noble Gas (argon,krypton,xenon,neon)
           - Addtl Hw: connects to the BCX Ultra unit
          
    - Cost: incl w BCX Ultra Standard Package

    Why Using Ray Tubes In Rife Frequency Treatment is Important?
    1. Dr. Rife used the 'induction' method by means of plasma ray beam tubes with all of his rife frequency devices.
    2.  The BCX Ultra Hand Held plasma Ray Tubes is the evolution of Rife's stand-alone plasma beam tube technology where it combines the induction and conduction method of transmitting rife frequencies.    The Hand-Held Raytubes use induction, however when both tubes are held, conduction kicks in where the power delivered more than doubles transmitting from one tube through the body to the other tube. In fact the power increases even more than our stated 30 watts (see below video demonstration). Each Raytube operates at a different polarity (negative & positive) creating an electrical attraction between them. Stand-alone plasma Beam Tubes, including Rife's, are not incapable of this.
    3. The BCX Ultra Hand-Held Ray Tubes deliver the rife frequencies deeper in to the body due to:

    a.  Both Induction & Conduction delivery (more details)

    b. Hand-held ray tubes output a signficantly higher voltage than metal electrodes. 

    c. The Magnetic Effect produced by gas-filled hand-held Ray Tubes and with the radio carrier wave (RF), delivers deep in to the body. To view a demonstration verifying the Radio Carrier Wave emitted from the BCX Ultra Hand-Held Ray Tubes  dick for proof

    4. People prefer the "soft warm calming" feeling of the hand-held glass tubes vs the electrical tingly felt from the metal cylinders.
    5. BCX Ultra Hand-held Ray Tubes can be combined with metal footplates and/or gel pads and/or metal cylinders (1 up to 3 apparatuses at once).. giving an amazing total body coverage.
    6. When placing the BCX Ultra Hand-held Ray tubes on a specific targeted area the stronger & more effective the penetration.  

    7. Our Hand-Held Ray Tubes are 30 watts (See Test Data Proof of 42 watts power click for proof

     

    'Scalar waves are emissions that are not part of the electromagnetic (EM) spectrum. A few innovative researchers have evidence that some plasma devices emit scalar waves (as apparently did Royal Rife’s instrument)—and that these scalar waves help regenerate the body as well as possibly devitalize pathogens...' Nenah Sylver PHD, The Rife Handbook (2011 Edition)

     

    See demo video on how the POWER INCREASES when holding the Hand Held Ray Tubes (even > 30watts) click for more details  

    Clarification on Misstatements Published on the BCX Ultra Hand Held Ray Tubes

    We have already explained how the hand-held ray tubes transfer frequencies deep in to the body using both induction and conduction, higher voltage, and magnetic effect in the previous section. Since there is confusion and others misreporting about how the BCX Ultra delivers frequencies through the body, we decided to not only demonstrate this method in video but also how you can test it yourself. BCX Ultra Hand-held plasma Raytubes use Induction, Conduction  and Radiation, however, the majority of the transfer occurs with Conduction. Here are some simple tests that you can do yourself. 

    1. First lay both hand-held plasma tubes beside each approximately 4” apart & notice the dim glow. The dim glow is due to little conduction via air. Next, hold both hand-held plasma tubes in each hand. Notice the glow gets much brighter. Why? Conduction is now occurring, completing the circuit through your body so that the full power of the tubes flow from one tube through the body to the other tube.

    2. Second: When touching both tubes you will see the light gets brighter where you are touching the glass. The areas of the tube where you are touching that are brigher indicates where the current is transmitting out  the tube and into your fingers. Note: Our stand alone plasma beam tubes do not show this because they use mostly radiation & induction method.

    3. Third: Try this interesting experiment with a partner. Both of you stand side by side and with your outer hands holding one of the ray tubes. Have your inside hands drop down by your sides w palms facing down. Next, touch  your wrists together (inside hands) and notice the increased flow of energy since now the circuit is complete. If you look closely while doing this you will see sparks of light. This test will give you a strong sensual sense of understanding the principles of the hand-held ray tubes operation.

    You may ask how electricity goes through glass. Wikipedia. states. “The glass acts as a dielectric in a capacitor formed between the ionized gas and the hand.” [1] Most of the power of the Hand-held Raytubes are emitted by Conduction, which is why they are held. Glass is an insulator, however with high frequencies, electricity passes right through it since it’s dielectric characteristics change. It is an AC (alternating current) conductor & NOT a DC (direct current) conductor whichas the previous stated tests prove it.

    1. http://en.wikipedia.org/wiki/Plasma_globe

     

    TECHNICAL SPECS: details click 'Specs' TAB above

    Why BCX Ultra High Powered Beam Tubes (BT-HFPCM2)?


    BCX Ultra  BT-HFPCM2
    High Powered Bean Tube

    - Generates Plasma discharge &  minor Electric Field
    - Carrier: 1Hz to 4 MHz

    - Frequency: 1Hz to 4 MHz

    - Wave Form: (square, sine, etc.) Variable Intensity
    - Power: 125 microjoules/pulse (150 watts, 4 MHz both carrier & frequency)  

    - Tube Type: Double bubble Tube

    - Addtl HW: connects to BCX Ultra

    - Cost: $2695 or $4545 combo pkg w BCX Ultra unit

     
     

    Our High Powered High Frequency beam tube is a stand-alone device. The number one reason people use this device is that they are hands free and is perfect for use while sleeping or running on multiple people. This device runs all of our built in prestored programs, sweeping programs and Rife's original frequencies since it runs the full range of BCX Ultra frequencies and carrier wave. Another reason is because of it is power, 150 watts! 

    BCX Ultra BT-HFPCM seeing RF (Radio Frequencies) by Agilent Spectrum Analyzer in the air through a Radio Antenna: (BT-HFPCM is 3MHz)



    TECHNICAL SPECS: details click 'Specs' TAB above

    Why BCX Ultra Vortex?

           BCX Ultra Vortex

      - Carrier: Operates up to  45,000Hz
      - Frequency: Modulated 1 to 45,000hz
      - Wave Forms:  (square, sine, etc.)
      - Variable Intensity
      - Power: 48 watts maximum
      - Addtl Hw: connects to the BCX Ultra unit   
      - Cost: $1100

     

    Our Vortex beam tube can be worn on the body or as a stand-alone beam tube. The main reason for the Vortex is for people who want a stand alone tube because Rife used one or hands free while working/ sleeping.

    "The ray tube was a partially directional transmitter. Since its power or energy was concentrated into a small area, the practitioner placed the tube either within a few inches of the subject’s body, or in some cases directly on the person. Dr. Robert P. Stafford, one of Rife’s colleagues, reported that when he treated people who had cancer, he focused on 6 square inches at a time, moving the tube up and down, and back and forth, on the body until the entire affected area was treated." - Nena Sylver, PHD The Rife Handbook (2011 edition)

    The Vortex by no means takes the place of the hand held Ray Tubes that we are well known for. The hand-held Ray Tubes works differently, for more info refer to previous section on hand held ray tubes.

    For some time we had planned on doing what Rife did with the phanatron tube. His tube was in the 50 watt range and it was used for specific areas of the body. It would either touch the body or be held just off the body. The tube was used to pan the area of a tumor for an example'The ray tube was a partially directional transmitter.

    Vortex vs Phanatron Tube: The Vortex tube is directional to concentrate the energy more in one spot while the Phanatron Tube is more all directional. Benefits of the vortex tube for these 2 reasons:1) It is more for specific areas and not full body like the hand-held Ray Tubes & 2) your hand or arm can be put into the vortex tube.   

    TECHNICAL SPECS: details click 'Specs' TAB above

    Why LED Wands?


    HP LED Wands (High Powered)

    Ultra High Power LED Wand Model HW530A (Green):

       Wavelength 530 nm

       Intensity 435 Lumens

    Ultra High Power LED Wand Model HW626A (Red):

       Wavelength 626 nm

       Intensity 255 Lumens

    Ultra High Power LED Wand Model HW470A (Blue):

       Wavelength 470 nm

       Intensity 174 Lumens

     

    STD LED Wands (Standard)

     
    Color Wave nano
    metrs
    Lum Intens. (mc) Beam Wdth deg. Focal Plane 
    in.
    Lum. LED Fwd Volts LED Fwd Curr. (ma) TTL
    Power (mw)
    Effic. Lum/
    Watt
    Red 640 24,000

    20

    1.7 2.3 1.9 30 342 6.74
    Blue 467 21,600

    10

    2.15 1.33 2.7 30 486 2.73
    Green 520 108,00

    20

    1.7 10.37 3.2 30 576 18.00

    1. Wavelength for colored colored LED's ranges from long (infrared), to short (ultraviolet). White is a mixture of colors centered around a middle (color temperature).
    2.
    Luminous Intensity is the most accurate indicator of LIGHT INTENSITY.
    3. Beam width and Focal plane define the distance from the light source where the light is most even.
    4. Luminous flux takes into account the area over which the light at a given intensity is spread, and is the best representation of the QUANTITY OF LIGHT emitted.
    5. Power in watts is a poor representation of the light output. It actually only shows the electrical consumption of the device. For example, a 100 watt incandescent light bulb puts out the same amount of light as a 20 watt Compact Fluorescent bulb (CFL).

     
     

    Our LEDs are now available in three colors: red, green and blue.  They can be applied in a variety of ways including: on the eyes, in the navel, and on the skin. We offer 2 types of LEDs: High Powered LED and Standard LED.

    High Powered (HP) LEDs vs. Standard (Std) LEDs?

    The HP LEDs are so high powered that a fan is needed to cool it down. We are hearing that the LEDs are doing some wonderful things for tendon injuries and other deeper tissue injuries. As with laser therapy the blue is used more for external problems such as infections on the skin. The blue will not penetrate very deep. The green is the highest powered and used for deep issues. The red will penetrate quite deep, but not as deep as the green. With deeper tissue issues most people will alternate between the red and green HP LEDs. We certainly are not claiming you will get the results as you would with a 10-20 thousand dollar laser. However, many issues will clear up just as well with our Std HP led. Do not stare at our HP LEDs. Only use our Std LEDs on the eye lids NEVER the HP LEDs.

    It is stated that you can remove an allergic reaction by placing the offending food on the naval (in a baggie if needed) and hold the LEDs, Std or HP over the food and move it close to the skin moving in a clock wise direction only. Slowly move out the circular motion to 6 or 12 inches in diameter for about 2 minutes.


    Application on the eyes

    The green and red Std LEDs are applied alternately (green one day, red the next day, then green the following day, etc.).  Hold the LED 1/4th  inch away from an open eye, or directly on the lid of a closed eye.  Start with 1 minute per frequency for each eye, working up to 5 minutes per frequency for each eye. This can be done twice a day. 

     

    Application in the navel

    Red LEDs are applied directly in the navel to stimulate regeneration, for tonification and blood cleansing. 

    Application on the skin

    GREEN LEDs are applied directly on the affected area of the skin for mutated cells and tumors.  They can also be applied on acupuncture points.Apply for Pain Relief

    BLUE LEDs are used for SARS & Acne, and are applied directly on the affected area.

    RED LEDs are applied directly to the area for pain for relief.

    FREQUENCIES for LEDs

    All frequencies are applicable for use with  LEDs.

    ** Brain cell/tissue repair  ...................2128

    Endorphin Stimulation for pain relief and relaxation ......2.5

    Eyesight, to improve.................................. see frequency manual 

    *Mutated cells, to shrink abnormal growth........ 17024

    Pain and inflammation, irritation............ 1, 123

    Seratonin stimulation for pain relief...2.5+80

    Tissue repair........................................266

    * This frequency is to be used 3 minutes in combination with 1 Hz. for 7 minutes, and 266 Hz.  for 5 minutes.

    ** This frequency is to be used 3 minutes in combination with 1 Hz. for 7 minutes, and 123 Hz.  for 5 minutes.

    TECHNICAL SPECS: details click on 'Specs' Tab (above)

    Why BCX Ultra PEMF Rife Mat?


    PEMF Rife Mat (Pulsed Electromagnetic Field Therapy)
      - Runs Rife Frequencies & Earth Frequencies
      - Frequencies: Modulated 10 to 10,000hz
      - Wave Forms:  (square, sine, etc.)
      - Variable Intensity,  4.7 gauss
      - Power: 20 watts maximum
      - Dimensions: 6ft x 28", 100% cotton
      - Addtl Hw: connects to the BCX Ultra unit   
      - Cost: $795
     
     

    Potential Benefits:

    • Improved macro (blood vessels dilating ) & micro (increased capillary blood flow) circulation 

    •  Increased partial oxygen pressure

    • Improving blood's ability to transport oxygen to the red blood cells

    •  Improved cellular metabolism

    •  Strengthens immune system

     

    Testimonial:

     The first 3 times I used the mat, I could feel more energy going into my entire neck area where I have had stiffness and possible thyroid issues. My blood test later showed the T3 and T4 count to be normal after years of low thyroid function. The second time, I could feel it in my sore left shoulder. It seemed that the energy was going to the area where my muscles have been in knots for a long time.... from lynda

    Pulsed Electromagnetic Field therapy (PEMFT), also known as PEMF, pulse magnetotherapy, and pulsed magnetic therapy. PEMFT is a therapy technique used in many ways, for example in depression & orthopedics treating  fusions,  fractures. When dealing with bone healing, PEMF sends magnetic pulses through the tissue where the magnetic pulses sends an  electrical signal stimulating cellular repair. Multiple studies have shown how effective PEMF is in healing wounds, reduces inflammation, alleviates  pain and many other conditions. Trials have been conducted by rheumatologists, hospitals, neurologists and physiotherapists.

    More information on PEMF Therapy

    - Wikipedia Definition details

    - Dr. Oz  details

    TECHNICAL SPECS: details click on 'Specs' Tab (above)

       
      BCX Ultra® Instructional DVD & Manual
    All packages include this
     
         
    Recommended for: Practitioners & Individual/Family  
    Warranty 2 years  
    Money-back guarantee 60-day, 10% restock fee, free shipping  
    Financing Available Yes  

    Comparisons & Reviews - BCX Ultra vs RF/EM Rife Machines..

    **** Dont see a Rife Device listed contact us for additional comparisons & reviews..

    FEATURES 1934 Rife Ray #3 * 1935 Rife Ray #4 * BCX Ultra BCX Ultra
    w BT-HFPCM  Beam Tube
    Pearl M

    F-Scan 2

    F 170 TrueRife F-117
    EMEM
    Ray Tube
    EMX Beam Ray EM Ideal Generator Energy Wellness Global Wellness Wellness Pro 2010 Pro Wave 101  Detox Box MFG-1000 JW Labs Model A & B RPG 900 Beam Ray Rife Bare Systems
    Outputs all Rife's original high RF Frequencies    
    RF Carrier
    1hz-4Mhz (variable)

    1hz-4Mhz (variable)

    27.125 Mhz (fixed)
                   
    Simultaneous RF Frequencies 3 3 3 pre-programmed, infinite w custom wave 3 pre-programmed, infinite w custom wave 3                  
    Outputs Simultaneous Audio Frequencies     3 pre-programmed, infinite w custom wave 3 pre-programmed, infinite w custom wave 8                  
    Single Audio Frequency
    Ray Tube
     ** hand-held Ray Tubes incl, addt'l various Beam Tube models  

    stand-alone High Powered Plasma Beam Tubes
                       
    Ray Tube Harmonics                  
    Frequency range in Hertz 2 Million 22.5 Million * 4 Million * 4 Million   1 million 15 million 20,000 10,000 10,000 10 Million 10,000 20 Million 10,000 10,000 10,000 21,275 10,000 20,000 10,000 10,000 28,000 - 500,000
    Analog Frequencies not listed not listed not listed              
    50% Duty Cycle
    Variable 10% -90% Duty Cycle                  
    Square Wave
    Sine Wave                  

    Pulsating Square Wave

       

                                     

    Hoyland Wave

    Pulse Modulated Wave

    Triangle Wave

    Trapezoid

    Exponential RampUp Wave

    Exponential RampDown Wave

    Linear RampUp Wave

    Linear RampDown Wave

    Odd Order Harmonic Wave

    Even Order Harmonic Wave

    Custom Waves

     

     

     

     

     

     

     

     

     

     

     

     

    ** See Why are Wave Forms important?

     

     

     

     

     

     

     

     

     

     

     

     

    ** See Why are Wave Forms important?
    Power Level (approximate) 50 watts 100 watts -18 watts amplifier built in to unit
    -30 watts Hand-Held Ray Tubes
    - 150 watts HP Beam Tube
    - 83 watts EFG Beam Tube
    - 10 watts PEMF Body Frequency Matt
    - Doug Coil(coming soon) 
    150 watts BT-HFPCM2 Beam Tube  100 watts 0.20 watts 0.20 watts not listed not listed 0.20 watts not listed 10 watts 0.20 watts 0.20 watts 0.20 watts 0.20 watts 0.20 watts 0.20 watts 0.20 watts 1
    watt
    not listed
    Pre-stored Programs    
    Customizable Programs ?    
    Gating Features                  
    Frequency Sweeps Sophisticated Sweep Function (both Frequency & Carrier Wave) Sophisticated Sweep Function (both Frequency & Carrier Wave)              
    Displays Actual Frequencies              
    Apparatuses INCLUDED:
    -(2) hand-held plasma ray tubes-(2) metal hand held wands-(2) metal footplates-(2) gel pads

    OPTIONAL:
    - Std LEDs
    - HP LEDs
    - Vortex
    - BT-HFPCM2 Beam Tube
    - HP-EFG Beam Tube
    - NEW Body Frequency PEMF  Matt
    ** Doug Coil (coming soon),
     
    - BT-HFPCM2 Beam Tube (now 150w, 4Mhz)
    included:PEMF Plasma Tube

    optional: LEDs,  Electrode Pads, Handheld electrodes, footplates

     

    only metal & gel electrodes Plasma beam tube       only metal & gel electrodes            
    Warranty, Return Policy     2 yr, 60 day return 2 yr, 60 day return 2 yr, 60 day return                                
    Comments Longest producing unit manufacturer, 21 yrs,

    Chaining function: Now select multiple programs to run during a session instead of 1 at a time

    BCX Ultra runs ALL access. incl BT-HPPCM2 Beam tube
    Longest producing unit manufacturer, 21 yrs

    Chaining function: Now select multiple programs to run during a session instead of 1 at a time

    BCX Ultra runs ALL access.
                        note: The manufacturer claims NOT a Rife device. FDA approved as a TENS unit only.             

    For More Rife Device Comparisons or questions Call us at 888-874-0944 or email us or Click to Chat Live .

    Blog w TIPS, Testimonials, Protocols, More frequencies, Buyers Guide, & more

    Visit BLOG for The Rife MachineBCX Ultra testimonials, tips, protocols & ..

    LEARN MORE ......
     FAQ - FREQUENTLY ASKED QUESTIONS

    1. Is there a need to run above 4.00 MHz (4,000,000 Hz)? up to 4Mhz carrier wave & frequency is enough to run Rife's Orginal frequencies. 

    2. Why would I want to get the more powerful stand alone BCX Ultra Beam Tubes?

    Our BCX Ultra already includes a wide range of Apparatuses/Electrodes and optional. Our clients have had great success with just the included Hand-held Ray Tubes & metal apparatuses (ie footplates). However with the stand alone BCX Ultra Beam Tubes (double-bubble/phanatron tube) can kill off organisms at a faster rate due to the intense power they produce and can be run while you are sleeping. 

    3. Why is your included Hand-held Plasma Ray Beam Tubes apparatus better then the metal apparatuses? click on above 'Why BCX Accessories' TAB

    4. Do I need to buy a new BCX unit if there any software upgrades or hardware upgrades?

    Any Software Upgrades, just send in your unit to get the latest & greatest. Future option will be through your computer. For hardware upgrades in most cases your unit for a nominal fee can be upgraded, contact us and we can give you an estimate.

    5. Does the BCX Ultra have Radio Carrier Wave & Gating Wave? Yes Why do I need to have them?   click for 'DEFINITIONS' below 

    6. Do I need to buy any additional equipment for the BCX Ultra?

    No, both Amplifier & Frequency Generator are both built-in to our BCX Ultra unit (other units are separate) AND (4) Apparatuses are included (proprietary Hand Held RayTubes, metal footplates, metal hand-held cylinders, & pre-gel pads) other units have no included apparatuses or they only have metal cylinders. We do have additional apparatuses but not required and are optional. 

    7. What happens if your PRE-STORED Programs do not have a frequency or frequencies that I would like to run?

    We have 256 slots (manual programs) to save your own frequencies and for each slot you can save up to 48 frequencies making a total of 12,288 frequencies. You can also combine Pre-Stored programs and save them to your own custom manual program.

    8. What happens if I want to change the settings of a PRE-STORED Program?

    When you run a pre-stored program you have the ability to make any modifications you would like Or just run as is.

    9. Do I want the ability to SWEEP a range of frequencies?

    Yes it is a 'nice to have' functionality since it can run through a range of frequencies without having to store each individual frequency and with the BCX Ultra you can also try sweeping thru a range of carrier waves. However please note that you must be sure that the range you are running is valid so use this functionality wisely. Just because Frequencies are close in range DOES NOT mean they have the same purpose. An example would be 9.7 Hz for tendons. You don’t want 9.6 or 9.8 because your results will be diminished. Another example, 1444Hz is to normalize testosterone in men and 1445 is to normalize testosterone in women. You certainly wouldn’t want a male using the machine and have the frequency drift up towards 1445. It is important to keep this in mind when you are running sweeping.

    With a sweep you can be doing the wrong frequency the majority of the time except for that brief moment when you brush over the correct freq. With our machine you are doing a sweep in which you can select how long to dwell on a frequency instead of only a few seconds. When you briefly play a frequency for a few seconds you bruise it slightly. Where as seen on Royal Rife's videos blowing up microorganisms, the microorganism struggles for many seconds or minutes before it blows up. Rife and the early geniuses who worked with Rife new that you needed to strongly hit an organism long enough so that it would build up a big enough resonate charge to blow it up. Again, a few seconds will only tease it. We do include Pre-stored programs that do a wide sweep of basic microbial clean-up.

    10. How Far Really can ANY Beam Tube radiate out?

    The output intensity for ANY spherical radiating device is specified by what is referred to as the "Inverse-Square Law":  Intensity = Power / (4 x PI x Radius^2)

    Example:
    Power at 1 ft = X
    Power at 2 ft = X/4
    Power at 3 ft = X/9
    Power at 4 ft = X/16
    Power at 5 ft = X/25
    Power at 6 ft = X/36
    Power at 7 ft = X/49
    Power at 8 ft = X/64
    Power at 9 ft = X/81
    Power at 10 ft = X/100

    In other words, you have 1% of the power at 10 feet away that you have from 1 foot away. Even at 1,000 ft and more there is still some power, although very small. Without knowing what the desired power level is, you can't specify an "Output Range".  If you are interested in maximum power, you want the shortest distance possible. Period.
    Some unit manufacturers will specify output ranges effective ie 30 feet out (more or less). As you can see power is not effective this far out but the frequency signal can be picked up. If you don’t have the power then the frequency isn’t effective.

    11. Why is the Output Power rating of the Ultra higher than the Power Supply power?

    The BCX Ultra does not merely output a frequency- that is not what Rife machines do. Real Rife machines "Modulate" the frequency. This turns the frequency on and off at a programmed rate with designated waveforms. Thus the average power drawn from the power supply is less than the maximum power that the BCX Ultra delivers.

    12. Do you want to run Multiple Frequencies ?

    Those who run multiple frequencies simultaneously are seeking the benefits of the time savings to use multiple frequencies. BCX Ultra manufacturer decided to cap at 3 simultaneous frequencies (frequency, carrier wave, & gating) due to the more frequencies ran the more the wattage/power is divided up thereby decreasing the power delivered per frequency. In turn then the user has to repeat the frequencies to get the needed dose. The BCX Ultra can run up to 3 frequencies (frequency wave, carrier wave & gating). Other manufacturers  state differently. We believe running 1 carrier wave & 1 frequency with the most power output for that accessory is the best method for treatment. Having 1 carrier wave carrying multiple frequencies is not as effective. Now they state that if there is enough power delivered then each frequency will be effective and all is needed is .20 watts per frequency. However we limit our metal electrode power output to .75 watts (w 30-35 volts) to stay within safe limits since electricity is the means of delivery thru metal electrodes (this doesn’t apply to the plasma accessories). Most of our clients can’t handle the full .75 watts (then turn down the power) so we wonder how can someone handle the full power of 2.7watts? Keep in mind our BCX Ultra has a built in 18 watt amplifier so we easily can produce the power. Note our BCX Ultra unit has different accessories that add additional power to go from 20watts all the way up to 150 watts depending on the accessory. Refer this link for the test data proving this Click Here for Test Data..

    WAVE FORMS:   Square wave is for killing pathogens and sine wave is used for regeneration and healing. The BCX Ultra has many other waveforms to choose from for your experimentation. At this time we use the sq. pulse width as the default because we are getting better results with this modified square wave than standard square wave. Many of our clients have reported this.

    CARRIER WAVES:  The BCX Ultra has a carrier frequency so that the audio frequency can piggyback (carried) by the RF frequency (the carrier) causing the frequencies to penetrate deeper and farther. RF or radio frequencies above about 200,000 Hertz broadcast very well which is why they are called radio frequencies. Frequencies between 20,000 and 200,000 Hz broadcast to some degree, while frequencies below 20,000 Hz do not broadcast at all. Both the BCX Ultra RF carrier and audio frequency can be set anywhere from 1hz to 4Mhz.There are prestored programs with audio frequencies and carrier wave already set however carrier wave and other settings can be changed if so desired. The BCX Ultra gives you the ability to research and do your own testing.

    GATING OR ENTRAINMENT This is what we used to call pulse. The previous unit had a pulse rate of about 2/3’s on and 1/3 off. You can use 3.5 Hz to get this same effect. We now use 56.2 Hz as the default in the BCX Ultra.

    Abrams who worked with Rife used 3.5-4 Hz for gating. Dr. James Bare, a leader in the field of frequency technology, recommends the 20-30-40 Hz range for gating. It is generally believed that the higher the frequency the higher the gating. Rife’s 1939 instrument, which ran in the MHz range, had a 60 cycle gating.

    What is gating? Gating is another form of modulation. The BCX Ultra is modulating 2 frequencies when it plays an audio frequency with a carrier (RF) frequency. In other words, the audio frequency is piggy backed onto a higher frequency. All the time this is happening, the Ultra introduces gating which creates the blink, blink you see  as you play your frequencies.

    Entrainment is defined as: “the tendency for two oscillating bodies to lock into phase so that they vibrate in harmony. It is also defined as a synchronization of two or more rhythmic cycles.” This principle of entrainment is universal in nature.     

    DUTY CYCLE:  The Ultra has a default of 90 percent duty cycle. For many years people ran the standard 50% duty cycle. It is now known that a 90 % duty cycle exposes microorganisms to the frequency for 80% more time than a 50% duty cycle. Do the math. 90% is 80% greater than 50%. It is known that the higher the duty cycle, the greater the coordinative resonance. However, experimenters may choose any duty cycle 1-100 using the Ultra.

    What is duty cycle? Duty cycle is how long the frequency is on and off when running a frequency. For example, if running the frequency 100Hz, the frequency is cycling 100 times per second. A 50% duty cycle means that the frequency is on 50 % and off 50% of each second. The 90 % duty cycle means that the frequency is on 90% and off 10% of each second. During the 90% on, it is cycling at the rate of 100 times a second.

    GLASS HAND-HELD RAY TUBES:  Hold the glass part of the tubes in the hands, under the arms, or in direct contact with the skin on any area of the body. For more information click 'Why BCX Accessories ' TAB above

    GLASS HAND-HELD RAY TUBES & FOOT PLATES:  Generally the glass tubes are used simultaneously with the footplates. This gives more frequency power into the body. Some people prefer to use the glass tubes alone.    

    When running the BCX Ultra sidebands and direct Rife/Hoyland frequencies', you will use either the metal cylinders, metal footplates and/or BT-HFPCM2. If using the BCX Ultra standard-hand-held accessories and when running frequencies near, equal to, or above 100,000Hz, use metal cylinders for best results in place of hand-held ray tubes due to faulty frequency output around 100,000Hz as evidenced by strange harmonics when tested using sophisticated instrumentation. This is indicative of a lack of a clear and accurate frequency output. This 'only' applies to the hand-held ray tubes and Vortex. The BT-HFPCM2 beam tube & metal electrodes can run any frequency or carrier wave from 1hz to 4Mhz with no issues.  At Whitman Technology, we are committed to honesty in engineering; therefore, we disclose any technological limitations.

                         Philip Hoyland's Audio Frequencies used with the listed carrier to produce, through side bands, Dr. Rife's frequencies

    Rife #4-Scoon's audio freq.

    BCX Ultra carrier in Hz

    BCX Ultra freq

    Actinomycosis/Streptothrix

    191,803 Hz

    191,800 Hz

    3 Hz

    Anthrax

    139,200 Hz

    139,200 Hz

    139,200 Hz

    B or E Coli Rod

    416,510 Hz

    416,500 Hz

    10 Hz

    B or E Coli Virus

    769,035 Hz

    769,000 Hz

    35 Hz

    BX Virus Carcinoma

    1,607,450 Hz

    1,607,500 Hz

    50 Hz

    BY Sarcoma

    1,529,520 Hz

    1,520,500 Hz

    20 Hz

    Gonorrhea

    233,000 Hz

    233,000 Hz

    233,000 Hz

    Pneumonia/Spinal Meningitis

    426,862 Hz

    426,800 Hz

    62 Hz

    Staphylococcus Pyogenes Aureus

    477,660 Hz

    477,600 Hz

    60 Hz

    Streptococcus Pyogenes

    719,150 Hz

    719,200 Hz

    50 Hz

    Syphilis

    788,700 Hz

    788,700 Hz

    788,700 Hz

    Tetanus

    234,000 Hz

    234,000 Hz

    234,000 Hz

    Tuberculosis Rod

    369,433 Hz

    369,400 Hz

    33 Hz

    Tuberculosis Virus

    769,000 Hz

    769,000 Hz

    769,000 Hz

    Typhoid Rod

    759,450 Hz

    759,500 Hz

    50 Hz

    Typhus Virus

    1,445,180 Hz

    1,445,100 Hz

    80 Hz

    Worms (from Aubrey Scoon)

    3,300,000 Hz

    2,400 Hz

                                        Rife/Hoyland Direct MOR's

    BCX Ultra carrier in Hz  BCX Ultra freq.
    Anthrax  3,300,000 Hz  3,340,800 Hz 
    BX Virus Carcinoma  3,300,000 Hz 3,214,900 Hz 
    Gonorrhea  3,300,000 Hz  3,262,000 Hz 
    Pneumonia/Spinal Meningitis 3,300,000 Hz 3,414,900 Hz
    Syphilis 3,300,000 Hz 3,154,800 Hz
    Tetanus 3,300,000 Hz 3,276,000 Hz
    Tuberculosis Virus 3,300,000 Hz 3,076,000 Hz
    Typhoid Rod 3,300,000 Hz 3,037,800 Hz

     BLOG w TIPS, Testimonials, Protocols, More frequencies, Buyers Guide, & more

    Read actual email submissions from other very satisfied customers.

    “I would never return this machine in a million light years..…”

        Read Full Testimonial

    “Another Lyme Story..…”

        Read Full Testimonial

    “TIPS - How to Buy a unit..…”

        Read Full Testimonial

    “Testimonials ..…”

        Read Full Testimonial

     

    About Frequency, Waveforms, Harmonics and Power

    “Frequency” is the # of times in a second an electrical pulse occurs, defined in Hertz (Hz). 10 Hz means that a signal changes polarity or pulses 10 times per second. Kilo (abbreviated K) means 1,000 (thousand), Mega (abbreviated M) means 1,000,000 (million), and Giga (abreviated G) means 1,000,000,000 (billion). 10 KHz is the same as 10,000 Hz. 10 MHz is the same as 10,000,000 Hz.

    Frequencies that can be heard are called Audio frequencies (abbreviated AF), and the rest of the frequencies (which are easily transmitted through the air) are commonly called Radio frequencies (abbreviated RF). (Although Audio frequencies are technically Radio frequencies as well) The dividing line between Audio and Radio frequencies is not consistent, varying with different people and industries. Frequencies below 100,000 Hz are audible to some animals and will not produce significant side effect frequencies that can be easily transmitted through the air. 100,000 Hz. is one appropriate dividing line between Audio and Radio frequencies.

    Electrical signals act differently at different frequencies. A characteristic called “skin effect” (which is not confined to skin) causes a conductor to resist the flow of electricity as a function of frequency- the higher the frequency, the greater the resistance to the flow of electricity. At low frequencies, say 60 Hz (household electricity), a sufficiently high voltage has the ability to penetrate through the body and create cardiac arrest. At high frequencies, say 1 GHz (low frequency radar), the same amplitude voltage can only penetrate a fraction of an inch into a body, and will only create a surface skin burn called a RF burn.

    “Waveforms” are patterns of electrical energy over a period of time. A Sinewave is the fundamental building block of electricity and other energies. Sinewave mathematically defines a natural action describing a harmonic alternating event.

    Mapping the elevation of a point on the perimeter of a circle as it constantly turns can show a Sinewave. On this picture, note that the arm is attached to the perimeter of a wheel. As the wheel is turned, the arm moves up and down, and a pen draws a Sinewave on paper that moves left to right.

     

     

     

    A Sinewave travels above and below a middle, or mid point, (+ and -), like waves advance and receed from an average position on the shoreline.

    There are other common waveforms, such as Triangle waves and Square waves:

     

     

    They obviously look different than Sinewaves, but they are closely related. Adding together Sinewaves of different frequencies, amplitudes, and phases creates Triangle, Square, and all other waveforms. The mathematics is straight forward.

     

    WAVES Generated by BCX Ultra:

     

    HARMONICS is the combination of all the different frequency Sinewaves making up a complex waveform, for example Triangle wave, Square wave, & all other waves. Below lists the “Harmonic Content” of the BCX Ultra waveforms power generated.

     

    Harmonic-

    Referring to the above chart, 1’st (x1) Harmonic  is the 'actual' frequency, 2’nd (X2) Harmonic is another frequency 2 x as large as the 'actual' frequency, and 3’rd (x3) Harmonic is another frequency 3 x as large as the 'actual' frequency, and continues on.

    For Example: An Actual Frequency of 10 Hz, then a 2’nd Harmonic = 20 Hz; & the 3’rd Harmonic = 30 Hz.

    For Example: A Triangle waveform @ 100Hz is generated by combining 99% of a 100Hz Sinewave w 1% of a 300Hz Sinewave.

    Phase is the relationship of each Harmonic starting point within a period of time. Phases with different starting points will form different waveforms, however it will not change the ratios of power for each Harmonic delivered.

    POWER””

    Various Waveforms are generated with uniform Peak to Peak (the lowest point to highest point) values. However, Peak to Peak values that are equal doesn't mean the same power is delivered and can deliver different power amounts. A Squarewave delivers 3 x more power than a Triangle Wave when at equal intensities. A Squarewave (intensity setting at 33%) will deliver the same power amount as a Triangle wave with 100% intensity.

     

    The below Table lists the power of the various waveforms.

     

    The BCX Ultra is able to produce three concurrent 'Arbitrary' waveforms generated by a computer so they are not limited to electronic signals, for example the Sine wave & Squarewave. The BCX ultra can produce endless combinations of Harmonics (w any phase & ratio) since the BCX Utra waveforms are arbitrary.

    1. "Gate or Pulse” is the 1st BCX Ultra waveform. Gating or Pulsing are the commonly known terms, however since the BCX Ultra has much greater capability of Gating/Pulsing, a better term would be “Modulate”. Modulating is where the waveform is increased and decreased by the power output intensity. Most rife devices (if they even have Gating/Pulsing) are not able to do this. They can only turn the signal on & off.

    Inorder for a Gate/Pulse waveform to properly pass the harmonics of the Output frequency wave, the Gate/Pulse frequency wave must be lower than the other waveform frequencies.

    2. “Duty Cycle” will insert an Off time in between each Modulated waveform and will correspondingly alter the frequency of the waveform. Selecting a Duty Cycle of 100% prevents any Modulation of the output, leaving it on full the entire time.

    Example: A frequency of 1 Hz. is selected, which is 1 change per second. A duty cycle of 50% is selected. One complete waveform will take place in ½ second, after which the output will be blanked for ½ second. The process will then repeat.

    3. “Carrier” is the term for the second Ultra waveform, and following conventional electronics, it “carries” a lower frequency within it. As such, in order to work properly, a Carrier frequency should be higher than the remaining waveform frequency.

    4. “Frequency” is the term for the last Ultra waveform and is “carried” by the Carrier. Sequences are generally composed of a program of “Frequencies” one after another, each with the same “Gate” or “Pulse”, and “Carrier” (which is optional).

    5. "Pulsewidth”: In addition to the waveforms described, there is an additional Arbitrary waveform that operates differently. It is called “Pulsewidth”. Pulsewidth varies the On to Off ratio in a sweeping pattern as the program runs.

    Example: A frequency of 1 Hz is selected, which is 1 change each second. The Output is turned on for 1/100’th of a second, and then turned off for 99/100’ths of a second. Next, it is turned on for 2/100’ths of a second, and then off for 98/100’ths of a second. This continues until it is on 99/100’ths of a second, after which the sweep starts again.

    Electrodes are “differential”. Each operates at a different polarity than the other, and they change polarities with frequency- when one is +, the other is -. All 3 waveforms can be applied to Electrodes.

    Raytubes also have polarity, but the Carrier is capped at 100,000 MHz.

    LED Wand has no polarity, and all 3 waveforms can be applied to it.

    High Powered Beam Tubes (stand-alone) has no polarity, and all BCX Ultra waveforms can be applied to it.

     

     POLICIES & DISCLAIMERS

    DISCLAIMER: The BCX Ultra Plasma Frequency Instrument is not approved by the F.D.A. as a Medical Device. They are experimental electronic instruments. They are not intended for the diagnosis, prevention, treatment, cure or mitigation of any disease in humans. They are not designed to affect the structure or function of any system in the body. If you have a health-related condition that requires medical attention, always consult with a licensed health care professional. NOTE: You should realize though, that you do have LEGAL Rights to self-medicate under the 9th Amendment of the United States Constitution.

    PRECAUTIONS: DO NOT use ANY Electrotherapy Device, if you have a Cardiac Pacemaker or Internal Defibrillator. DO NOT use ANY Electrotherapy Device, if you are a Pregnant Woman, have Heart Disease, are driving or are using HAZARDOUS Machinery. These Devices should also be kept out of reach of Children. DO NOT place Electrode Pads over Skin Lesions, Abrasions, NEW Scars, Cuts, Eruptions, or Sunburn. DO NOT advance Output Amplitude to UNCOMFORTABLE Levels. DO NOT fall asleep, while using. * If you feel Sluggish, Faint, Dizzy, Headachy, Nauseous, or have Flu-like Symptoms after Exposures, REDUCE Number of Pulses per Session and/or SHORTEN Session Times. Use CAUTION, if you have IMPAIRED Kidney or Liver Function. Use CAUTION, if you have Metal Implant. Someone, although rare, may feel a sensation where the metal implant is located. However, they opt to run the freqs because the sensation is less bothersome than the problem.

     

    SYSTEMS UNLIMITED

    Warranty Guarantee


    Please inspect contents of package upon arrival and report broken glass tubes within the first 24 hours of delivery. Tubes with broken glass will not be covered by this warranty beyond the first 24 hours of delivery.

    Systems Unlimited warrants your BCX Ultra to be free of defects in material and workmanship under normal use for two year from date of purchase, parts and labor included.  Customer will be responsible for shipping fees incurred when mailing the instrument to the engineer for repairs.  Systems Unlimited will be responsible for shipping fees incurred when mailing the instrument back to the customer while under warranty.  Any unauthorized repairs or modifications are not covered under this warranty.

    60-day money back guarantee less 10% restocking fee if you are not completely satisfied with your purchase.  No shipping charges reimbursed. 




    Easy Ways to Pay- Our Convenient Payment Options  
     

    We make it simple to bring home a system today. Read about our (4) convenient payment options below.

    CHOOSE (1) of  the 4 OPTIONS:

    Pay in full with a Major Credit Card/Echeck

    Pay in full by using our online shopping cart or call in 888-874-0944 using a MasterCard, VISA, Discover, Diner's Club, Paypal Echeck 

    OR

    Pay in full with CASH & get  5%OFF Discount

    Pay in full by calling in 888-874-0944 or email for Cash details using a Check or Wire.

    OR

    Pay with Lease to Buy Low Monthly Payment Plan

    Pay using our 'Lease To Buy' Plan and make low monthly payments (just select the term of the lease or # of payments) and fill out the below online application. Your credit is then checked, and if approved the papers will be emailed to you. Your order will be shipped once lease papers are submitted and first months payment is received.

    To apply, fill out the apply online application.

    OR

    Pay with PayPal Credit (Bill Me Later) Monthly Plan (0%, No Payments for 6mths)

    Pay using our Paypal Credit at checkout (formerly 'Bill Me Later'). Is subject to credit approval by just answering 2 questions & accepting terms. You must pay with 'PayPal Credit' at checkout to get the offer.  Your order will be shipped once approved. ** No fee, No Payments & 0% interest (if paid off 6 months for > $99

    Logo

    HAVE a Paypal account?

    • Check out with PayPal and then choose PayPal Credit.
    • Answer 2 quick questions and accept the terms.
    • You’ll know within seconds if you are approved.
    • Look for your PayPal Credit statement via email.

    OR

     

    DO NOT have a Paypal account?

        1. Choose an item for online purchase

     

       2. Select the 'Check Out' button

      

      3. Choose ''Don't have a Paypal account'

       4. Select 'PAYPAL CREDIT' option (new name for BillMeLater) & fill in your information

     

        

    More questions? PAYPAL Credit click here

     

     
    back to top |  BCX Ultra Products & Pricing

    Information regarding technical product data, ordering information, and support literature, go to BCX Ultra Products & Pricing, or call 888-874-0944, or contact us. We look forward to hearing from you!
     

    >>>>>>>>>>>>>>>>>>>>>>>>>>>>